Menu

All MS under ISC B

NOTE: To search for a specific Malaysian Standard, press Ctrl + F and type in the MS number or any key word from the title of the MS.

NO MS NUMBER TITLE OF MS ICS NUMBER NATURE OF MS REFERENCED INT. STANDARD COMMITTEE NAME
1 MS 24:1971 SPECIFICATION FOR TOILET SOAP 71.100.70 INDIGENOUS - SOAPS AND DETERGENTS
2 MS 11:1971 SPECIFICATION FOR ANTIMONY OXIDE FOR PAINTS 87.060.10 INDIGENOUS BS 338:1967 PAINTS AND VARNISHES
3 MS 12:1971 SPECIFICATION FOR TITANIUM DIOXIDE FOR PAINTS 87.060.10 INDIGENOUS - PAINTS AND VARNISHES
4 MS 10:1971 SPECIFICATION FOR TRIMMED SIZES OF PAPERS AND BOARDS 35.260 INDIGENOUS - PULP, PAPER AND BOARD
5 MS 166:1973 SPECIFICATION FOR OXYGEN (TECHNICAL GRADE) 71.040.40 INDIGENOUS - GENERAL PURPOSE CHEMICALS
6 MS 168:1973 SPECIFICATION FOR NITROGEN 71.040.40 INDIGENOUS - GENERAL PURPOSE CHEMICALS
7 MS 169:1973 SPECIFICATION FOR CARBON DIOXIDE 71.100.40 INDIGENOUS - GENERAL PURPOSE CHEMICALS
8 MS 170:1973 SPECIFICATION FOR COMPRESSED HYDROGEN, ELECTROLYTIC 71.040.40 INDIGENOUS - GENERAL PURPOSE CHEMICALS
9 MS 173:1973 SPECIFICATION FOR COMPRESSED AIR (OIL FREE) 71.100 INDIGENOUS - GENERAL PURPOSE CHEMICALS
10 MS 107:1973 METHOD OF TEST FOR PYROGENS 11.100 INDIGENOUS - To withdraw.
Proposed by ISC B and approved by DSM in Taskforce Meeting 1/2018
11 MS 133: PART A4:1973 METHOD OF TEST FOR PAINTS : PART A4 : NOTES FOR GUIDANCE ON PAINT APPLICATION 87.040 INDIGENOUS - PAINTS AND VARNISHES
12 MS 133: PART F4:1973 METHODS OF TEST FOR PAINTS : PART F4 : RESISTANCE TO CONTINUOUS SALT SPRAY 87.040 INDIGENOUS - PAINTS AND VARNISHES
13 MS 133: PART G4:1973 METHODS OF TEST FOR PAINTS : PART G4 : RESISTANCE TO HOT FATS 87.040 INDIGENOUS - PAINTS AND VARNISHES
14 MS 163:1973 SPECIFICATION FOR WATER PAINT/DISTEMPER, WASHABLE OIL BOUND 87.040 INDIGENOUS BS 3900 PAINTS AND VARNISHES
15 MS 215:1974 SPECIFICATION FOR SULPHURIC ACID (BATTERY GRADE) 71.060.30 INDIGENOUS BSI 3031:1958, CGSB 15-GP-86, SAA C.60-1961 GENERAL PURPOSE CHEMICALS
16 MS 240:1974 SPECIFICATION FOR DALAPON SODIUM SALT, WATER SOLUBLE POWDER 65.100 INDIGENOUS - PESTICIDES AND GROWTH REGULANT
17 MS 216:1974, AMD. 1:1985 SPECIFICATION FOR SULPHURIC ACID (TECHNICAL GRADE) 71.060.30 INDIGENOUS - GENERAL PURPOSE CHEMICALS
18 MS 186:1974, Including AMD. 1:1985 SPECIFICATION FOR CHLORATES FOR AGRICULTURAL WEED KILLERS 65.100.99 INDIGENOUS AS N 24-1955 PESTICIDES AND GROWTH REGULANT
19 MS 270:1975 SPECIFICATION FOR PRIMING PAINT : RED-LEAD BASED FOR IRON AND STEEL 87.060 INDIGENOUS BS 3900 PAINTS AND VARNISHES
20 MS 272:1975 SPECIFICATION FOR PRIMING PAINT : ZINC CHROMATE FOR METAL SURFACES 87.060 INDIGENOUS BS 3900 PAINTS AND VARNISHES
21 MS 288:1975 SPECIFICATION FOR PAINT, DRY, CEMENTITIOUS (CEMENT PAINT) 87.060 INDIGENOUS - PAINTS AND VARNISHES
22 MS 313:1975 METHOD FOR RING CRUSH TEST OF PAPERBOARDS 85.060 INDIGENOUS - PULP, PAPER AND BOARD
23 MS 418:1976, AMD. 1:1985 SPECIFICATION FOR TECHNICAL WARFARIN AND RODENTICIDE PREPARATIONS 71.040.30 INDIGENOUS - PESTICIDES AND GROWTH REGULANT
24 MS 419:1976 SPECIFICATION FOR WARFARIN CONCENTRATES 71.040.40 INDIGENOUS - PESTICIDES AND GROWTH REGULANT
25 MS 420:1976 SPECIFICATION FOR THIRAM WATER-DISPERSIBLE POWDERS 71.040.40 INDIGENOUS - PESTICIDES AND GROWTH REGULANT
26 MS 422:1976 SPECIFICATION FOR CAPTAN WATER-DISPERSIBLE POWDERS 71.040.40 INDIGENOUS - PESTICIDES AND GROWTH REGULANT
27 MS 423:1976 SPECIFICATION FOR TECHNICAL CAPTAN FOR PESTICIDAL PREPARATIONS 71.100 INDIGENOUS - PESTICIDES AND GROWTH REGULANT
28 MS 421:1976, Including AMD. 1:1985 SPECIFICATION FOR TECHNICAL THIRAM FOR PESTICIDAL PREPARATIONS 71.100 INDIGENOUS - PESTICIDES AND GROWTH REGULANT
29 MS 508:1977 SPECIFICATION FOR SODIUM CHLORATE (TECHNICAL GRADE) 71.060.99 INDIGENOUS BS 4122:1967 GENERAL PURPOSE CHEMICALS
30 MS 509:1977 SPECIFICATION FOR CALCIUM CARBIDE 71.060.99 INDIGENOUS - LIME & LIME PRODUCTS
31 MS 480:1977 CODE OF PRACTICE ON THE SAFETY LABELLING OF PESTICIDE PRODUCTS 65.100.01 INDIGENOUS - PESTICIDES AND AGROCHEMICALS
32 MS 507:1977 METHODS OF TESTS FOR INDUSTRIAL GASES 71.100.20 INDIGENOUS - GENERAL PURPOSE CHEMICALS
33 MS 530:1977 METHODS OF TEST FOR AMMONIUM NITRATE (USED IN EXPLOSIVES) 71.100.30 INDIGENOUS - To withdraw.
Proposed by ISC B and approved by DSM in Taskforce Meeting 1/2018
34 MS 560:1978, AMD. 1:1985 SPECIFICATION FOR MARINE SPAR VARNISH (COPAL VARNISH) 71.100.50 ADAPTED FROM INTERNATIONAL STANDARD BS 245:1956 PAINTS AND VARNISHES
35 MS 646:1980 SPECIFICATION FOR INDUSTRIAL METHYLATED SPIRITS 71.080.60 INDIGENOUS BS 3591:1963 GENERAL PURPOSE CHEMICALS
36 MS 658:1980 SPECIFICATION FOR LEAD ARSENATE TECHNICAL FOR PESTICIDE PREPARATIONS 65.100.01 INDIGENOUS - PESTICIDES AND GROWTH REGULANT
37 MS 659:1980 SPECIFICATION FOR FENITROTHION TECHNICAL FOR PESTICIDAL PREPARATIONS 65.100.01 INDIGENOUS - PESTICIDES AND GROWTH REGULANT
38 MS 660:1980 SPECIFICATION FOR TRICHLOROFON TECHNICAL FOR PESTICIDAL PREPARATIONS 65.100.01 INDIGENOUS - PESTICIDES AND GROWTH REGULANT
39 MS 665:1980 AMD. 1:1985 SPECIFICATION FOR FENITROTHION WATER DISPERSIBLE POWDERS 65.100.01 INDIGENOUS - PESTICIDES AND GROWTH REGULANT
40 MS 666:1980 AMD. 1:1985 SPECIFICATION FOR TRICHLORFON WATER SOLUBLE POWDERS 65.100.01 INDIGENOUS - PESTICIDES AND GROWTH REGULANT
41 MS 653:1980 SPECIFICATION FOR FOLDERS AND FILES 55.040 INDIGENOUS - PULP, PAPER AND BOARD
42 MS 756:1981 SPECIFICATION FOR CHINA CLAY 91.100.15 INDIGENOUS - CLAY & CLAY PRODUCTS
43 MS 752:1981 SPECIFICATION FOR SODIUM SILICATES 71.100.01 INDIGENOUS SS 111:1974, BS 3984:1966, ASTM D537, AWWA B404-58 GENERAL PURPOSE CHEMICALS
44 MS 730:1981 SPECIFICATION FOR ENDOSULFAN DISPERSIBLE POWDER 65.100.01 INDIGENOUS - PESTICIDES AND GROWTH REGULANT
45 MS 731:1981 SPECIFICATION FOR ENDOSULFAN TECHNICAL FOR PESTICIDAL PREPARATION 65.100.01 INDIGENOUS - PESTICIDES AND GROWTH REGULANT
46 MS 747:1981 SPECIFICATION FOR GAMMA-BHC EMULSIFIABLE CONCENTRATES 65.100.01 INDIGENOUS - PESTICIDES AND GROWTH REGULANT
47 MS 748:1981 SPECIFICATION FOR ENDOSULFAN EMULSIFIABLE CONCENTRATES 65.100.01 INDIGENOUS - PESTICIDES AND GROWTH REGULANT
48 MS 749:1981 (AMD. 1:1986) SPECIFICATION FOR ENDOSULFAN DUSTS 65.100.01 INDIGENOUS - PESTICIDES AND GROWTH REGULANT
49 MS 732:1981 PAPER, BOARD, PULP AND RELATED TERMS - VOCABULARY 01.040.85, 85.060 ADAPTED FROM INTERNATIONAL STANDARD ISO 4046:1978 PULP, PAPER AND BOARD
50 MS 847:1983 SPECIFICATION FOR SILICA SAND FOR THE MANUFACTURE OF SODIUM SILICATE 91.100.15 INDIGENOUS - CLAY & CLAY PRODUCTS
51 MS 855:1983 SPECIFICATION FOR NEWSPRINT 35.260 INDIGENOUS - PULP, PAPER AND BOARD
52 MS 880: PART 2:1984 METHODS OF TEST FOR PHOSPHORIC ACID : PART 2 : DETERMINATION OF OXIDES OF NITROGEN CONTENT 71.060.30 MODIFIED TO INTERNATIONAL STANDARD (RETYPE) ISO 3709 GENERAL PURPOSE CHEMICALS
53 MS 916:1984 SPECIFICATION FOR CHLORPHENIRAMINE MALEATE 71.080.99 INDIGENOUS - To withdraw.
Proposed by ISC B and approved by DSM in Taskforce Meeting 1/2018
54 MS 917:1984 SPECIFICATION FOR HYDROCHLOROTHIAZIDE 71.080.01 INDIGENOUS - To withdraw.
Proposed by ISC B and approved by DSM in Taskforce Meeting 1/2018
55 MS 291:1984 SPECIFICATION FOR PAINT, VARNISH AND LACQUER REMOVER, SOLVENT TYPE, NON-FLAMMABLE (FIRST REVISION) 87.040 INDIGENOUS TT-R-251 D, BS 3761:1970, AS K147:1964 PAINTS AND VARNISHES
56 MS 903:1984 SPECIFICATION FOR LATEX EMULSION PAINT FOR INTERIOR USE 87.020, 87.040 INDIGENOUS - PAINTS AND VARNISHES
57 MS 905:1984 SPECIFICATION FOR WHITE SPIRIT FOR PAINTS AND OTHER PURPOSES 87.060.30 INDIGENOUS BS 245:1976, ISO/DP 1250 PAINTS AND VARNISHES
58 MS 329:1976 (CONFIRMED:1984) SPECIFICATION FOR GUMMED PAPER TAPES 85.080 INDIGENOUS - PULP, PAPER AND BOARD
59 MS 880: PART 4:1985 METHODS OF TEST FOR PHOSPHORIC ACID : PART 4 : DETERMINATION OF ARSENIC CONTENT 71.060.30 MODIFIED TO INTERNATIONAL STANDARD (RETYPE) ISO 3359-1975 GENERAL PURPOSE CHEMICALS
60 MS 880: PART 5:1985 METHODS OF TEST FOR PHOSPHORIC ACID : PART 5 : DETERMINATION OF SULPHATE CONTENT 71.060.30 MODIFIED TO INTERNATIONAL STANDARD (RETYPE) ISO 2997:1974 GENERAL PURPOSE CHEMICALS
61 MS 880: PART 6:1985 METHODS OF TEST FOR PHOSPHORIC ACID : PART 6 : DETERMINATION OF CHLORIDE CONTENT 71.060.30 MODIFIED TO INTERNATIONAL STANDARD (RETYPE) ISO 3708:1976 GENERAL PURPOSE CHEMICALS
62 MS 880: PART 7:1985 METHODS OF TEST FOR PHOSPHORIC ACID : PART 7 : DETERMINATION OF LEAD CONTENT: ATOMIC ABSORPTION SPECTROPHOTOMETRIC METHOD 71.060.30 MODIFIED TO INTERNATIONAL STANDARD (RETYPE) ISO 6678:1981 GENERAL PURPOSE CHEMICALS
63 MS 880: PART 1:1985 METHODS OF TEST FOR PHOSPHORIC ACID : PART 1 : DETERMINATION OF TOTAL PHOSPHORUS (V) OXIDE CONTENT 71.060.30 INDIGENOUS ISO 3708-1976 GENERAL PURPOSE CHEMICALS
64 MS 880: PART 3:1985 METHODS OF TEST FOR PHOSPHORIC ACID : PART 3 : DETERMINATION OF IRON CONTENT 71.060.30 INDIGENOUS ISO/R 849:1968 GENERAL PURPOSE CHEMICALS
65 MS 1003:1986 SPECIFICATION FOR FORMALDEHYDE SOLUTION FOR INDUSTRIAL USE 71.080.15 INDIGENOUS IS 3321:1973, BS 2942:1957, ASTM D2378:1979 GENERAL PURPOSE CHEMICALS
66 MS 1029: PART 1:1986 METHODS OF TEST FOR FORMALDEHYDE SOLUTION FOR INDUSTRIAL USE : PART 1 : DETERMINATION OF FORMALDEHYDE CONTENT 71.080.15 INDIGENOUS ISO 2227-1972 GENERAL PURPOSE CHEMICALS
67 MS 1029: PART 2:1986 METHODS OF TEST FOR FORMALDEHYDE SOLUTION FOR INDUSTRIAL USE :PART 2 : DETERMINATION OF IRON CONTENT 71.080.15 INDIGENOUS ISO 2226-1972 GENERAL PURPOSE CHEMICALS
68 MS 1029: PART 3:1986 METHODS OF TEST FOR FORMALDEHYDE SOLUTION FOR INDUSTRIAL USE : PART 3 : DETERMINATION OF METHANOL CONTENT. 71.080.15 INDIGENOUS ISO 2228-1972 GENERAL PURPOSE CHEMICALS
69 MS 133: PART F9:1986 METHODS OF TEST FOR PAINTS : PART F9 : WASHABILITY 87.040 INDIGENOUS AS K41 PAINTS AND VARNISHES
70 MS 121:1986 SPECIFICATION FOR SCHOOL EXERCISE BOOKS (FIRST REVISION) 85.080 INDIGENOUS - PULP, PAPER AND BOARD
71 MS 17:1986 SPECIFICATION FOR FACIAL TISSUE PAPER (FIRST REVISION) 85.080 INDIGENOUS - PULP, PAPER AND BOARD
72 MS 283:1986 SPECIFICATION FOR CARBON PAPER FOR TYPEWRITERS (FIRST REVISION) 85.080 INDIGENOUS - PULP, PAPER AND BOARD
73 MS 1029: PART 4:1987 METHODS OF TEST FOR FORMALDEHYDE SOLUTION FOR INDUSTRIAL USE : PART 4 : DETERMINATION OF ACIDITY. 71.080.15 INDIGENOUS ISO 2225-1972 GENERAL PURPOSE CHEMICALS
74 MS 1029: PART 5:1987 METHODS OF TEST FOR FORMALDEHYDE SOLUTION FOR INDUSTRIAL USE : PART 5 : DETERMINATION OF ASH 71.080.15 INDIGENOUS ISO 2224-1972 GENERAL PURPOSE CHEMICALS
75 MS 1078:1987 METHODS OF TEST FOR BOILING POINT OF ENGINE COOLANTS/ANTIFREEZES 71.100.45 ADAPTED FROM INTERNATIONAL STANDARD ASTM D1120 GENERAL PURPOSE CHEMICALS
76 MS 880: PART 8:1987 METHODS OF TEST FOR PHOSPHORIC ACID : PART 8 : DETERMINATION OF COPPER CONTENT 71.060.30 INDIGENOUS - GENERAL PURPOSE CHEMICALS
77 MS 1079:1987 METHOD OF TEST FOR DETERMINATION OF TOTAL ANIONIC DETERGENT BY HYAMINE TITRATION 71.100.40 INDIGENOUS - SOAPS AND DETERGENTS
78 MS 1081:1987 METHOD OF TEST FOR DETERMINATION OF CATIONIC ACTIVE MATTER IN DETERGENTS- BY DIRECT TWO PHASE TITRATION PROCEDURE 71.100.40 INDIGENOUS ISO 2871:1973, ISO 2271:1972 SOAPS AND DETERGENTS
79 MS 162:1987 SPECIFICATION FOR ALUMINIUM WOOD PRIMER (FIRST REVISION) 87.040 INDIGENOUS - PAINTS AND VARNISHES
80 MS 289:1987 SPECIFICATION FOR ALUMINIUM FINISHING PAINT (FIRST REVISION) 87.04 INDIGENOUS - PAINTS AND VARNISHES
81 MS 1103:1988 METHOD OF DETERMINATION OF WATER USING KARL FISCHER REAGENT 13.060.50 INDIGENOUS ASTM E203-75 GENERAL PURPOSE CHEMICALS
82 MS 1104:1988 SPECIFICATION FOR PAINTERS' AND DECORATORS' BRUSHES (NATURAL BRISTLES) 97.195 INDIGENOUS SLS 562:1982, IS 487:1976 PAINTS AND VARNISHES
83 MS 1131: PART 1:1989 METHODS OF TEST FOR DALAPON : PART 1 : DETERMINATION OF 2, 2-DICHLOPROPIONIC ACID CONTENT 65.100.10 INDIGENOUS - PESTICIDES AND GROWTH REGULANT
84 MS 1160:1989 SPECIFICATION FOR SCHOOL CHALKS 35.260 INDIGENOUS - PULP, PAPER AND BOARD
85 MS 994:1990 SPECIFICATION FOR WATER FOR LEAD-ACID BATTERIES 29.220.20 INDIGENOUS - GENERAL PURPOSE CHEMICALS
86 MS 1189:1990 SPECIFICATION FOR LAUNDRY BAR SOAP 71.100.70 INDIGENOUS - SOAPS AND DETERGENTS
87 MS 1185:1990 SPECIFICATION FOR TALCUM POWDER 71.100.70 INDIGENOUS - To withdraw.
Proposed by ISC B and approved by DSM in Taskforce Meeting 1/2018
88 MS 1190:1990 SPECIFICATION FOR CARBONLESS PAPER OR NO CARBON REQUIRED NCR) PAPER 35.260 INDIGENOUS - PULP, PAPER AND BOARD
89 MS 120:1992 SPECIFICATION FOR ENVELOPES (FIRST REVISION) 85.080 INDIGENOUS - PULP, PAPER AND BOARD
90 MS 1287:1992 SPECIFICATION FOR EXERCISE BOOK PAPER 85.080 INDIGENOUS - PULP, PAPER AND BOARD
91 MS 1290:1992 SPECIFICATION FOR OFFSET PRINTING PAPER 85.080 INDIGENOUS - PULP, PAPER AND BOARD
92 MS 13:1993 SPECIFICATION FOR AMMONIUM SULPHATE, FERTILIZER GRADE (FIRST REVISION) 65.080 INDIGENOUS - FERTILIZERS
93 MS 1328:1993 SPECIFICATION FOR TRIPLE SUPERPHOSPHATE, FERTILIZER GRADE 65.080 INDIGENOUS IS 1013:1972 FERTILIZERS
94 MS 1329:1993 SPECIFICATION FOR DIAMMONIUM PHOSPHATE; FERTILIZER GRADE 65.080 INDIGENOUS IS 6448:1971 FERTILIZERS
95 MS 1330:1993 SPECIFICATION FOR AMMONIUM CHLORIDE, FERTILIZER GRADE 65.080 INDIGENOUS SLS 621:1983 FERTILIZERS
96 MS 14: PART 1:1993 SPECIFICATION FOR UREA, FERTILIZER GRADE (FIRST REVISION) 65.080 INDIGENOUS - FERTILIZERS
97 MS 14: PART 2:1993 SPECIFICATION FOR UREA, FERTILIZER GRADE : PART 2 : PRILLED UREA (FIRST REVISION) 65.060.80 INDIGENOUS - FERTILIZERS
98 MS 15:1993 SPECIFICATION FOR POTASSIUM CHLORIDE, FERTILIZER GRADE (FIRST REVISION) 87.060.10 INDIGENOUS - FERTILIZERS
99 MS 16:1993 SPECIFICATION FOR POTASSIUM SULPHATE, FERTILIZER GRADE (FIRST REVISION) 87.060.10 INDIGENOUS - FERTILIZERS
100 MS 48:1993 SPECIFICATION FOR GROUND MAGNESIUM LIMESTONE, AGRICULTURAL GRADE (FIRST REVISION) 87.060.10 INDIGENOUS - FERTILIZERS
101 MS 50:1993 SPECIFICATION FOR CALCIUM AMMONIUM NITRATE FERTILIZER (FIRST REVISION) 87.060.10 INDIGENOUS - FERTILIZERS
102 MS 51:1993 SPECIFICATION FOR SINGLE SUPERPHOSPHATE (FIRST REVISION) 65.080 INDIGENOUS - FERTILIZERS
103 MS 52:1993 SPECIFICATION FOR AMMONIUM SULPHATE NITRATE FERTILIZER (FIRST REVISION) 65.080 INDIGENOUS - FERTILIZERS
104 MS 53:1993 SPECIFICATION FOR AMMONIUM NITRATE FERTILIZER (FIRST REVISION) 65.080 INDIGENOUS - FERTILIZERS
105 MS 1303: PART 1:1993 SPECIFICATION FOR THERMOPLASTIC ROAD MARKING MATERIALS : PART 1 : REQUIREMENTS 83.080.20 INDIGENOUS BS 6088 PAINTS AND VARNISHES
106 MS 132:1993 SPECIFICATION FOR UNDERCOATING PAINT FOR USE UNDER GLOSS ENAMEL PAINT(FIRST REVISION) 87.040 INDIGENOUS - PAINTS AND VARNISHES
107 MS 1327:1993 SPECIFICATION FOR ZINC PHOSPHATE PRIMER 87.040 INDIGENOUS - PAINTS AND VARNISHES
108 MS 133: PART A5:1993 METHODS OF TEST FOR PAINTS AND VARNISHES : PART A5: LARGE SCALE BRUSHING TEST (FIRST REVISION) 87.040 INDIGENOUS ISO/TR 3172 PAINTS AND VARNISHES
109 MS 133: PART A8:1994 METHODS OF TEST FOR PAINTS AND VARNISHES : PART A8 : FLASH/NO FLASH TEST - CLOSED CUP EQUILIBRIUM METHOD (FIRST REVISION) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 1516-1981 PAINTS AND VARNISHES
110 MS 1363:1994 SPECIFICATION FOR DISODIUM TETRABORATE PENTAHYDRATE FERTILIZER GRADE 65.080 INDIGENOUS - FERTILIZERS
111 MS 417: PART 3:1994 THE ANALYSIS OF FERTILIZERS : PART 3 : METHOD FOR THE DETERMINATION OF NITROGEN (FIRST REVISION) 65.080 INDIGENOUS - FERTILIZERS
112 MS 909:1994 SPECIFICATION FOR COMPOUND FERTILIZERS, PREMIUM GRADE (FIRST REVISION) 65.080 INDIGENOUS - FERTILIZERS
113 MS 1364:1994 METHOD FOR DETERMINATION OF BRIMFUL CAPACITY OF AEROSOL CANS 55.130 INDIGENOUS - HOUSEHOLD PESTICIDES
114 MS 417: PART 2:1994, Including AMD. 1:2001 THE ANALYSIS OF FERTILIZERS : PART 2 : METHOD FOR THE DETERMINATION OF MOISTURE CONTENT, PARTICLE SIZE AND ASH CONTENT (FIRST REVISION) 65.080 INDIGENOUS - FERTILIZERS
115 MS 417: PART 4:1994, Including AMD. 1:2001 THE ANALYSIS OF FERTILIZERS : PART 4 : METHOD FOR THE DETERMINATION OF PHOSPHORUS (FIRST REVISION) 65.080 INDIGENOUS - FERTILIZERS
116 MS 417: PART 5:1994, Including AMD. 1:2001 THE ANALYSIS OF FERTILIZERS : PART 5: METHOD FOR THE DETERMINATION OF POTASSIUM (FIRST REVISION) 65.080 INDIGENOUS - FERTILIZERS
117 MS 417: PART 6:1994, Including AMD. 1:2001 THE ANALYSIS OF FERTILIZERS : PART 6 : METHOD FOR THE DETERMINATION OF MAGNESIUM (FIRST REVISION) 65.080 INDIGENOUS - FERTILIZERS
118 MS 644:1995 SPECIFICATION FOR FERTILIZER MIXTURES 65.080 INDIGENOUS - FERTILIZERS
119 MS 401: PART 1:1995 SPECIFICATION FOR HORMONE WEEDKILLERS OF THE PHENOXYACETIC ACID TYPES : PART 1 : TECHNICAL 2,4-D (FIRST REVISION) 65.100.99 INDIGENOUS - PESTICIDES AND GROWTH REGULANT
120 MS 401: PART 2:1995 SPECIFICATION FOR HORMONE WEEDKILLERS OF THE PHENOXYACETIC ACID TYPES : PART 2 : TECHNICAL 2,4-D SODIUM SALT MONOHYDRATE (FIRST REVISION) 65.100.99 INDIGENOUS - PESTICIDES AND GROWTH REGULANT
121 MS 401: PART 3:1995 SPECIFICATION FOR HORMONE WEEDKILLERS OF THE PHENOXYACETIC ACID TYPES : PART 3 : TECHNICAL 2,4-D ESTERS (FIRST REVISION) 65.100.99 INDIGENOUS - PESTICIDES AND GROWTH REGULANT
122 MS 401: PART 4:1995 SPECIFICATION FOR HORMONE WEEDKILLERS OF THE PHENOXYACETIC ACID TYPES : PART 4 : 2,4-D ESTER EMULSIFIABLE CONCENTRATES (FIRST REVISION) 65.100.99 INDIGENOUS - PESTICIDES AND GROWTH REGULANT
123 MS 401: PART 5:1995 SPECIFICATION FOR HORMONE WEEDKILLERS OF THE PHENOXYACETIC ACID TYPES : PART 5 : 2,4-D SALT AQUEOUS SOLUTION (FIRST REVISION) 65.100.99 INDIGENOUS - PESTICIDES AND GROWTH REGULANT
124 MS 401: PART 6:1995 SPECIFICATION FOR HORMONE WEEDKILLERS OF THE PHENOXYACETIC ACID TYPES : PART 6 : 2,4-D SODIUM SALT MONOHYDRATES WATER SOLUBLE POWDERS (FIRST REVISION) 65.100.99 INDIGENOUS - PESTICIDES AND GROWTH REGULANT
125 MS 125:1995, Including AMD. 1:1997 SPECIFICATION FOR GLOSS ENAMEL PAINT (SECOND REVISION) 87.040 INDIGENOUS - PAINTS AND VARNISHES
126 MS ISO 9227:1996 CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS (ISO 9227:1990, IDT) 77.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 9227:1990 ISC B
127 MS 49:1994, ERR. 1:1996 SPECIFICATION FOR COMPOUND FERTILIZER, ORDINARY GRADE (SECOND REVISION) 87.060.10 INDIGENOUS - FERTILIZERS
128 MS 428:1976 (CONFIRMED:1996) CODE OF PRACTICE FOR SAFETY IN THE MANUFACTURE AND HANDLING OF PESTICIDES 65.100 INDIGENOUS - PESTICIDES AND AGROCHEMICALS
129 MS 417: PART 8:1997, Including AMD.1:2001 THE ANALYSIS OF FERTILIZERS : PART 8 : METHOD FOR THE DETERMINATION OF SECONDARY PROPERTIES (FIRST REVISION) 65.080 INDIGENOUS - FERTILIZERS
130 MS 133: PART C4:1973 (RECONFIRMED:1997) METHODS OF TEST FOR PAINTS AND VARNISHES - FREEDOM FROM RESIDUAL TACK (FIRST REVISION) 87.040 INDIGENOUS - PAINTS AND VARNISHES
131 MS 133: PART C7:1997 METHODS OF TEST FOR PAINT AND VERNISHES: PART C7 : DETERNIMATION OF DRYING TIME USING BK DRYING RECORDER (SURFACE DRY, TOUCHED DRY AND HARD DRY) 87.040 INDIGENOUS - PAINTS AND VARNISHES
132 MS 133: PART D5:1997 METHODS OF TEST FOR PAINTS AND VARNISHES : PART D5 : MEASUREMENT OS SPECULAR GLOSS OF NON-METALLIC PAINT FILM AT 20, 60 AND 85 (FIRST REVISION) 87.040 INDIGENOUS ISO 2813:1994 PAINTS AND VARNISHES
133 MS 1431:1998 PAINTS AND VARNISHES: PREPARATION OF ACID EXTRACTS FROM PAINTS IN LIQUID OR POWDER FORM (ISO 6713:1984, IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 6713:1984 PAINTS AND VARNISHES
134 MS 273:1998 SPECIFICATION FOR PARAQUAT DICHLORIDE AQUEOUS SOLUTIONS (FIRST REVISION) 65.100.99 INDIGENOUS - PESTICIDES AND GROWTH REGULANT
135 MS 1774: PART 4:1998 SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES 97.200.50 ADAPTED FROM INTERNATIONAL STANDARD EN 71-4:1990 SAFETY OF TOYS
136 MS 1774: PART 5:1998 SAFETY OF TOYS - PART 5: CHEMICAL TOYS (SETS) OTHER THAN EXPERIMENTAL SETS 97.200.50 ADAPTED FROM INTERNATIONAL STANDARD EN 71-5:1993 SAFETY OF TOYS
137 MS 1774: PART 6:1998 SAFETY OF TOYS - PART 6: GRAPHICAL SYMBOL FOR AGE WARNING LABELLING 97.200.50 ADAPTED FROM INTERNATIONAL STANDARD EN 71-6:1995 SAFETY OF TOYS
138 MS 133: PART B1:1998 METHODS OF TEST FOR PAINTS AND VARNISHES : PART B1: DETERMINATION OF WATER (FIRST REVISION) 33.100.01 INDIGENOUS BS 3900:1985:Part B1, ISO 760:1978(E)  PAINTS AND VARNISHES
139 MS 133: PART D8:1999 METHODS OF TEST FOR PAINTS AND VARNISHES: PART D8: DETERMINATION OF HIDING POWER USING KUBELKA-MUNK METHOD FOR WHITE AND LIGHT COLOURED PAINTS 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 6504/1:1983 PAINTS AND VARNISHES
140 MS ISO 1974:1999 PAPER - DETERMINATION OF TEARING RESISTANCE (ELMENDORF METHOD)(ISO 1974:1990, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 1974:1990 PULP, PAPER AND BOARD
141 MS ISO 2144:1999 PAPER, BOARD AND PULPS - DETERMINATION OF RESIDUE (ASH) ON IGNITION AT 900°C (FIRST REVISION) (ISO 2144:1997, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 2144:1997 PULP, PAPER AND BOARD
142 MS ISO 5626:1999 PAPER - DETERMINATION OF FOLDING ENDURANCE 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 5626:1993 PULP, PAPER AND BOARD
143 MS ISO 6587:1999 PAPER, BOARD AND PULPS - DETERMINATION OF CONDUCTIVITY OF AQUEOUS EXTRACTS (ISO 6587 : 1992, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 6587:1992 PULP, PAPER AND BOARD
144 MS ISO 8791-2:1999 PAPER AND BOARDS - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAKMETHODS) - PART 2: BENDTSEN METHOD (FIRST REVISION) (ISO 8791-2:1990, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 8791-2:1990 PULP, PAPER AND BOARD
145 MS 647:1999 SPECIFICATION FOR SODIUM HYPOCHLORITE SOLUTIONS (FIRST REVISION) 71.060.20 INDIGENOUS SABS 296-1960 SOAPS AND DETERGENTS
146 MS 1450:1999 SPECIFICATION FOR LIQUID FERRIC CHLORIDE FOR POTABLE WATER TREATMENT 71.100.80 INDIGENOUS - WATER TREATMENT CHEMICALS
147 MS 1451:1999 SPECIFICATION FOR LIQUID FERRIC CHLORO SULPHATE FOR POTABLE WATER TREAMENT 71.100.80 INDIGENOUS - WATER TREATMENT CHEMICALS
148 MS 1452:1999 SPECIFICATION FOR LIQUID FERRIC SULPHATE FOR POTABLE WATER TREAMENT 71.100.80 INDIGENOUS - WATER TREATMENT CHEMICALS
149 MS 1456:1999 GUIDELINES FOR THE APPLICATION OF LIQUID FERRIC BASED SALTS IN POTABLE WATER TREATMENT 71.100.80 INDIGENOUS - WATER TREATMENT CHEMICALS
150 MS 133: PART E1:2000 METHODS OF TEST FOR PAINTS AND VARNISHES : PART E1 : BEND TEST (CYLINDRICAL MANDREL) (FIRST REVISION) (ISO 1519:1973, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 1519:1973 PAINTS AND VARNISHES
151 MS 133: PART E12:2000 METHODS OF TEST FOR PAINTS AND VARNISHES : PART E12 : INDENTATION TEST (SPHERICAL OR PYRAMIDAL) (ISO 6441:1984, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 6441:1984 PAINTS AND VARNISHES
152 MS 133: PART E2:2000 MOT FOR PAINTS AND VARNISHES : PART E2 : SCRATCH TEST (FIRST REVISION) (ISO 1518:1992, MOD) 87.040.10 MODIFIED TO INTERNATIONAL STANDARD ISO 1518:1992 PAINTS AND VARNISHES
153 MS 133: PART E7:2000 MOT FOR PAINTS AND VARNISHES : PART E7 : RESISTANCE TO IMPACT (FALLING BALL TEST) (FIRST REVISION) 87.040 INDIGENOUS BS 3900: Part E7:1974 PAINTS AND VARNISHES
154 MS ISO 2836:2001 GRAPHIC TECHNOLOGY-PRINTS AND PRINTING INKS-ASSESSMENT OF RESISTANCE TO VARIOUS AGENTS (ISO 2836 : 1999, IDT) 87.080 IDENTICAL TO INTERNATIONAL STANDARD ISO 2836 : 1999 GENERAL PURPOSE CHEMICALS
155 MS ISO 187:2001 PAPER, BOARD AND PULPS - STANDARD ATMOSPHERE FOR CONDITIONING AND TESTING AND PROCEDURE FOR MONITORING THE ATMOSPHERE AND CONDITIONING OF SAMPLES (ISO 187:1990, IDT) 85.040, 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 187:1990 PULP, PAPER AND BOARD
156 MS ISO 535:2001 PAPER AND BOARD - DETERMINATION OF WATER ABSORPTIVENESS - COBB METHOD (ISO 535:1991, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 535:1991 PULP, PAPER AND BOARD
157 MS ISO 536:2001 PAPER AND BOARD - DETERMINATION OF GRAMMAGE (ISO 536:1995, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 536:1995 PULP, PAPER AND BOARD
158 MS ISO 7213:2001 PULPS - SAMPLING FOR TESTING 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 7213:1981 PULP, PAPER AND BOARD
159 MS 417: PART 7:2001 THE ANALYSIS OF FERTILIZERS : PART 7 : METHOD FOR THE DETERMINATION OF BORON (SECOND REVISION) 65.080 INDIGENOUS ISO 1916:1972 FERTILIZERS
160 MS 47:1972 (CONFIRMED:2001) SPECIFICATION FOR BAT GUANO, FERTILIZER 65.080 INDIGENOUS - FERTILIZERS
161 MS 1116:2001 SPECIFICATION FOR SODIUM CHLORIDE FOR INDUSTRIAL USE (FIRST REVISION) 71.100 INDIGENOUS - GENERAL PURPOSE CHEMICALS
162 MS 175:1973 (CONFIRMED:2001) SPECIFICATION FOR GLACIAL ACETIC ACID 71.080.40 INDIGENOUS BS 576, JIS K 1351 GENERAL PURPOSE CHEMICALS
163 MS 176:1973 (CONFIRMED:2001) SPECIFICATION FOR NITRIC ACID (TECHNICAL GRADE) 71.060.30 INDIGENOUS - GENERAL PURPOSE CHEMICALS
164 MS 178:1973 (CONFIRMED:2001) SPECIFICATION FOR SULPHURIC ACID (AR GRADE) 71.060.30 INDIGENOUS - GENERAL PURPOSE CHEMICALS
165 MS 1518: PART 1:2001 SPECIFICATION FOR GLYPHOSATE : PART 1 : GLYPHOSATE (TECHNICAL) 65.100 INDIGENOUS - PESTICIDES AND AGROCHEMICALS
166 MS 1518: PART 2:2001 SPECIFICATION FOR GLYPHOSATE : PART 2 : GLYPHOSATE SOLUBLE CONCENTRATES 65.100 INDIGENOUS - PESTICIDES AND AGROCHEMICALS
167 MS 253:2001 SPECIFICATION FOR SCOURING POWDER (FIRST REVISION) 71.100.40 INDIGENOUS - SOAPS AND DETERGENTS
168 MS 167:1973 (CONFIRMED:2001) SPECIFICATION FOR ACETYLENE, DISSOLVED (TECHNICAL GRADE) 71.040.40 INDIGENOUS - GENERAL PURPOSE CHEMICALS
169 MS 172:1973 (CONFIRMED:2001) SPECIFICATION FOR NITROUS OXIDE 71.060.20 INDIGENOUS - GENERAL PURPOSE CHEMICALS
170 MS 133: PART E15:2002 METHODS OF TEST FOR PAINTS AND VARNISHES : PART E15 : DETERMINATION OF RESISTANCE TO ABRASION - ROTATING ABRASIVE RUBBER WHEEL METHOD (ISO 7784-2:1997, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 7784-2:1997 PAINTS AND VARNISHES
171 MS 133: PART E16:2002 METHODS OF TEST FOR PAINTS AND VARNISHES : PART E16 : DETERMINATION OF RESISTANCE TO ABRASION - RECIPROCATING TEST PANEL METHOD (ISO 7784-3:2000, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 7784-3:2000 PAINTS AND VARNISHES
172 MS 133: PART E17:2002 METHODS OF TEST FOR PAINTS AND VARNISHES : PART E17 : DETERMINATION OF MAR RESISTANCE USING A CURVED STYLUS (ISO 12137-1:1997, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 12137-1:1997 PAINTS AND VARNISHES
173 MS 133: PART E18:2002 METHODS OF TEST FOR PAINTS AND VARNISHES : PART E18 : DETERMINATION OF MAR RESISTANCE USING A POINTED STYLUS (ISO 12137-2:1997, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 12137-2:1997 PAINTS AND VARNISHES
174 MS 133: PART E19:2002 METHODS OF TEST FOR PAINTS AND VARNISHES : PART E19 : DETERMINATION OF FILM HARDNESS BY PENCIL TEST (ISO 15184:1998, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 15184:1998 PAINTS AND VARNISHES
175 MS 133: PART F2:2002 METHODS OF TEST FOR PAINTS AND VARNISHES : PART F2 : RESISTANCE TO HUMIDITY (CONTINUOUS CONDENSATION) (FIRST REVISION) (ISO 6270:1980, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 6270:1980 PAINTS AND VARNISHES
176 MS ISO 3688:2002 PULPS - PREPARATION OF LABORATORY SHEETS FOR THE MEASUREMENTS OF DIFFUSE BLUE REFLECTANCE FACTOR (ISO BRIGHTNESS) (ISO 3688:1999, IDT) 85.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 3688:1999 PULP, PAPER AND BOARD
177 MS ISO 692:2002 PULPS - DETERMINATION OF ALKALI SOLUBILITY (ISO 692:1982, IDT) 85.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 692:1982 PULP, PAPER AND BOARD
178 MS ISO 699:2002 PULPS - DETERMINATION OF ALKALI RESISTANCE (ISO 699 : 1982, IDT) 85.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 699: 1982 PULP, PAPER AND BOARD
179 MS 133: PART E8:2002 METHODS OF TEST FOR PAINTS AND VARNISHES : PART E8 : RESISTANCE TO IMPACT (PENDULUM TEST) 87.040 ADAPTED FROM INTERNATIONAL STANDARD BS 3900: Part E8:1974(1992) PAINTS AND VARNISHES
180 MS 1551:2002 SPECIFICATION FOR SODA ASH (SODIUM CARBONATE) USED FOR PORTABLE WATER SUPPLY 71.100.80 INDIGENOUS ISO 2460:1973 WATER TREATMENT CHEMICALS
181 MS ISO 6486-1:2003 CERAMIC WARE, GLASS-CERAMIC WARE AND GLASS DINNERWARE IN CONTACT WITH FOOD - RELEASE OF LEAD AND CADMIUM - PART 1 : TEST METHOD (ISO 6486-1:1999, MOD) 67.250, 81.040.30, 81.060.20, 97.040.60 MODIFIED TO INTERNATIONAL STANDARD ISO 6486-1:1999 CLAY & CLAY PRODUCTS
182 MS ISO 6486-2:2003 CERAMIC WARE, GLASS-CERAMIC WARE AND GLASS DINNERWARE IN CONTACT WITH FOOD - RELEASE OF LEAD AND CADMIUM - PART 2 : PERMISSIBLE LIMITS (ISO 6486-2:1999, IDT) 67.250, 81.040.30, 81.060.20, 97.040.60 IDENTICAL TO INTERNATIONAL STANDARD ISO 6486-2:1999 CLAY & CLAY PRODUCTS
183 MS ISO 11609:2003 DENTISTRY - TOOTHPASTE - REQUIREMENTS, TEST METHODS AND MARKING (ISO 11609:1995, IDT) 11.060.10 IDENTICAL TO INTERNATIONAL STANDARD ISO 11609:1995 SOAPS AND DETERGENTS
184 MS 133: PART F12:2003 METHODS OF TEST FOR PAINTS AND VARNISHES : PART F12 : DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG) (ISO 7253:1996, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 7253:1996 PAINTS AND VARNISHES
185 MS 133: PART F13:2003 METHODS OF TEST FOR PAINTS AND VARNISHES : PART F13 : DETERMINATION OF RESISTANCE TO FILIFORM CORROSION- STEEL SUBSTRATES (ISO 4623-1:2000, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 4623-1:2000 PAINTS AND VARNISHES
186 MS 133: PART F14:2003 METHODS OF TEST FOR PAINTS AND VARNISHES : PART F14 : DETERMINATION OF RESISTANCE TO ARTIFICIAL WEATHERING BY EXPOSURE TO FILTERED XENON-ARC RADIATION (ISO 11341:1994, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 11341:1994 PAINTS AND VARNISHES
187 MS 133: PART F15:2003 METHODS OF TEST FOR PAINTS AND VARNISHES : PART F15 : DETERMINATION OF RESISTANCE TO HUMIDITY (INTERMITTENT CONDENSATION) (ISO 11503:1995, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 11503:1995 PAINTS AND VARNISHES
188 MS 133: PART F16:2003 METHODS OF TEST FOR PAINTS AND VARNISHES : PART F16 : DETERMINATION OF RESISTANCE TO ARTIFICIAL WEATHERING (UV RADIATION AND WATER) (ISO 11507:1997, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 11507:1997 PAINTS AND VARNISHES
189 MS 133: PART F17:2003 METHODS OF TEST FOR PAINTS AND VARNISHES: PART F17: DETERMINATION OF WET-SCRUB RESISTANCE AND CLEANABILITY OF COATINGS (ISO 11997-1:1998, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 11997-1:1998 PAINTS AND VARNISHES
190 MS 133: PART F18:2003 METHODS OF TEST FOR PAINTS AND VARNISHES : PART F18 : DETERMINATION OF RESISTANCE TO CORROSION UNDER A WET (SALT FOG)/DRY/HUMIDITY CYCLE (ISO 11997-1:1998, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 11997-1:1998 PAINTS AND VARNISHES
191 MS ISO 186:2003 PAPER AND BOARD - SAMPLING TO DETERMINE AVERAGE QUALITY (ISO 186:2002, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 186:2002 PULP, PAPER AND BOARD
192 MS ISO 8787:2003 PAPER AND BOARD - DETERMINATION OF CAPILLARY RISE - KLEMM METHOD (FIRST REVISION) (ISO 8787:1986, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 8787:1986 PULP, PAPER AND BOARD
193 MS 643:2003 GLOSSARY OF TERMS USED IN THE FERTILIZER TRADE AND INDUSTRY (FIRST REVISION) 65.080 INDIGENOUS - FERTILIZERS
194 MS 1574:2003 SAMPLING AND PREPARING AQUEOUS SOLUTIONS OF ENGINE COOLANTS OR ANTIRUSTS FOR TESTING PURPOSES 71.080 INDIGENOUS ASTM D1176-98 GENERAL PURPOSE CHEMICALS
195 MS 1706:2003 TEST METHOD FOR ASH CONTENT OF ENGINE COOLANTS AND ANTIRUSTS 71.080 INDIGENOUS - GENERAL PURPOSE CHEMICALS
196 MS 1707:2003 TEST METHOD FOR RELATIVE DENSITY OR RELATIVE DENSITY OF ENGINE COOLANT CONCENTRATES AND ENGINE COOLANTS BY THE HYDROMETER 71.080 INDIGENOUS - GENERAL PURPOSE CHEMICALS
197 MS 1708:2003 TEST METHOD FOR CORROSION TEST FOR ENGINE COOLANTS 71.080 INDIGENOUS - GENERAL PURPOSE CHEMICALS
198 MS 1709:2003 TERMINOLOGY FOR ENGINE COOLANTS 71.080 INDIGENOUS - GENERAL PURPOSE CHEMICALS
199 MS 430:1976 (CONFIRMED:2003) SPECIFICATION FOR INK PASTE, BLACK (STENCIL, DUPLICATING-MACHINE) 87.080 INDIGENOUS - GENERAL PURPOSE CHEMICALS
200 MS 1569:2003 SPECIFICATION FOR PUTTY LIME 91.100 INDIGENOUS AS 4489.4.1:1997 LIME & LIME PRODUCTS
201 MS 1570:2003 METHOD OF TEST FOR CHEMICAL ANALYSIS OF PUTTY LIME 91.100 INDIGENOUS BS 6463: Part 2: 1984 LIME & LIME PRODUCTS
202 MS 133: PART C3:1996 (CONFIRMED:2003) METHODS OF TEST FOR PAINTS AND VARNISHES : PART C3: THROUGH-DRY TEST (FIRST REVISION) 87.040 INDIGENOUS ISO 9117:1990 PAINTS AND VARNISHES
203 MS 133: PART F10:2003 METHODS OF TEST FOR PAINTS AND VARNISHES : PART F10 : DETERMINATION OF RESISTANCE TO CATHODIC DISBONDING OF COATINGS FOR USE IN MARINE ENVIRONMENTS 87.040 ADAPTED FROM INTERNATIONAL STANDARD BS 3900: Part F10:1985 PAINTS AND VARNISHES
204 MS 133: PART F11:2003 METHODS OF TEST FOR PAINTS AND VARNISHES : PART F11 : DETERMINATION OF RESISTANCE TO CATHODIC DISBONDING OF COATINGS FOR USE IN ON LAND-BASED BURIED STRUCTURES 87.040 ADAPTED FROM INTERNATIONAL STANDARD BS 3900: Part F11:1985 PAINTS AND VARNISHES
205 MS 333:1976 AMD. 1:1984
(CONFIRMED:2003)
SPECIFICATION FOR STENCIL PAPER (DUPLICATING-MACHINE, DRY-PROCESS) 85.080 INDIGENOUS - PULP, PAPER AND BOARD
206 MS 284:1975 (CONFIRMED:2003) SPECIFICATION FOR CARBON PAPER, HANDWRITING 85.060 INDIGENOUS - PULP, PAPER AND BOARD
207 MS 285:1975 (CONFIRMED:2003) SPECIFICATION FOR PAPER (DUPLICATING COPY, LIQUID PROCESS) 85.080 INDIGENOUS - PULP, PAPER AND BOARD
208 MS 286:1975 (CONFIRMED:2003) SPECIFICATION FOR KRAFT PAPER, WRAPPING (UNBLEACHED AND UNTREATED) 85.060 INDIGENOUS - PULP, PAPER AND BOARD
209 MS 398:1976 (CONFIRMED:2003) SPECIFICATION FOR CORRUGATED FIBREBOARD BOXES 65.060 INDIGENOUS - PULP, PAPER AND BOARD
210 MS 1571:2003 SPECIFICATION FOR COPPER SULPHATE USED FOR POTABLE WATER SUPPLY 71.100.80 INDIGENOUS - WATER TREATMENT CHEMICALS
211 MS 1572:2003 SPECIFICATION FOR SODIUM ALUMINATE USED FOR POTABLE WATER SUPPLY 71.100.80 INDIGENOUS BS EN 882:1997 WATER TREATMENT CHEMICALS
212 MS 1573:2003 SPECIFICATION FOR SODIUM FLUORIDE USED FOR POTABLE WATER SUPPLY 71.100.80 INDIGENOUS - WATER TREATMENT CHEMICALS
213 MS 1576:2003 SPECIFICATION FOR POTASSIUM PERMANGANATE USED FOR POTABLE WATER SUPPLY 71.100.80 INDIGENOUS - WATER TREATMENT CHEMICALS
214 MS 1584:2003 SPECIFICATION FOR CALCIUM HYPOCHLORITE USED FOR POTABLE WATER SUPPLY 71.100.80 INDIGENOUS - WATER TREATMENT CHEMICALS
215 MS 1718:2003 SPECIFICATION FOR SODIUM HYPOCHLORITE USED FOR PORTABLE WATER SUPPLY 71.100.80 INDIGENOUS - WATER TREATMENT CHEMICALS
216 MS ISO 13820:2004 PAPER, BOARD AND CORRUGATED FIBREBOARD - DESCRIPTION AND CALIBRATION OF COMPRESSION-TESTING EQUIPMENT (NOTE: TOTAL ADOPTION OF ISO 13820: 1996) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 13820: 1996 PULP, PAPER AND BOARD
217 MS 377:1976 (CONFIRMED:2004) SPECIFICATION FOR SODIUM CARBONATE (TECHNICAL GRADE) 71.040.30 INDIGENOUS - GENERAL PURPOSE CHEMICALS
218 MS 431:1976 (CONFIRMED: 2004) SPECIFICATION FOR METHANOL (TECHNICAL GRADE) 71.080.60 INDIGENOUS - GENERAL PURPOSE CHEMICALS
219 MS 1729: PART 2:2004 WRITING AND MARKING INSTRUMENTS:PART 2: SPECIFICATION FOR END CLOSURES 97.180, 97.190 INDIGENOUS - SAFETY OF TOYS
220 MS 1728:2004 CHILD CARE ARTICLES - SOOTHER HOLDER - SAFETY REQUIREMENTS AND TEST 97.190 INDIGENOUS - SAFETY OF TOYS
221 MS 506:1977 (CONFIRMED:2004) SPECIFICATION FOR AMMONIA (ANHYDROUS AND AQUEOUS) 83.040.01 INDIGENOUS - GENERAL PURPOSE CHEMICALS
222 MS 387:1976 (CONFIRMED:2004) METHOD FOR THE DETERMINATION OF PHENOL COEFFICIENT 71.080.90 INDIGENOUS - To withdraw.
Proposed by ISC B and approved by DSM in Taskforce Meeting 1/2018
223 MS 290:1975 (CONFIRMED:2004) SPECIFICATION FOR PAPER (DRAWING AND TRACING) 85.080 INDIGENOUS - PULP, PAPER AND BOARD
224 MS 328:1976 (CONFIRMED:2004) SPECIFICATION FOR BLOTTING PAPER 85.080 INDIGENOUS - PULP, PAPER AND BOARD
225 MS 331:1976 (CONFIRMED:2004) SPECIFICATION FOR FILTER PAPER FOR USE IN CHEMICAL ANALYSIS 85.080 INDIGENOUS - PULP, PAPER AND BOARD
226 MS 1724:2004 SPECIFICATION FOR SODIUM SILICOFLUORIDE USED FOR POTABLE WATER SUPPLY 71.100.80 INDIGENOUS - WATER TREATMENT CHEMICALS
227 MS ISO 15733:2005 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR TENSILE STRESS-STRAIN BEHAVIOUR OF CONTINUOUS FIBER-REINFORCED COMPOSITIES AT ROOM TEMPERATURE (ISO 15733:2001, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 15733:2001 FINE CERAMICS
228 MS ISO 17562:2005 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR LINEAR THERMAL EXPANSION OF MONOLITHIC CERAMICS BY PUSH ROD TECHNIQUE (ISO 17562:2001, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 17562:2001 FINE CERAMICS
229 MS ISO 6142:2005 GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - GRAVIMETRIC METHOD (ISO 6142:2001, IDT) 71.040.40 IDENTICAL TO INTERNATIONAL STANDARD ISO 6142:2001 GENERAL PURPOSE CHEMICALS
230 MS 1850: PART 4:2005 WATER QUALITY - SAMPLING - PART 4: GUIDANCE ON SAMPLING FROM LAKES, NATURAL AND MAN-MADE (ISO 5667 - PART 4:1987, MOD) 13.060.01 MODIFIED TO INTERNATIONAL STANDARD ISO 5667 - PART 4:1987 SAMPLINGS (WATER QUALITY)
231 MS ISO 9198:2005 PAPER, BOARD AND PULP - DETERMINATION OF WATER-SOLUBLE SULFATES (ISO 9198: 2001, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 9198: 2001 PULP, PAPER AND BOARD
232 MS 1818:2005 STANDARD TEST METHOD FOR BOILING POINT OF ENGINE COOLANTS (FIRST REVISION) 71.080 ADAPTED FROM INTERNATIONAL STANDARD ASTM D1176 GENERAL PURPOSE CHEMICALS
233 MS 1825:2005 TEST METHOD FOR RESERVE ALKALINITY OF ENGINE COOLANTS AND ANTIRUSTS 71.080 ADAPTED FROM INTERNATIONAL STANDARD ASTM D1121-98 GENERAL PURPOSE CHEMICALS
234 MS 1886:2005 TEST METHOD FOR pH OF AQUEOUS SOLUTIONS WITH THE GLASS ELECTRODE 71.100.40 ADAPTED FROM INTERNATIONAL STANDARD ASTM E 70-97 SOAPS AND DETERGENTS
235 MS 1880: PART 4:2005 SOIL QUALITY - VOCABULARY PART 4: TERMS AND DEFINITIONS RELATED TO THE REHABILITATION OF SOILS AND SITES 13.080.01, 01040.13 INDIGENOUS ISO 11074-4:1999 SOIL QUALITY
236 MS 1815:2005 GRANULAR ACTIVATED CARBON FOR USE IN POTABLE WATER SUPPLY - SPECIFICATION 71.100.80 INDIGENOUS - WATER TREATMENT CHEMICALS
237 MS 1816:2005 SAND AND GRAVEL FOR USE IN POTABLE WATER SUPPLY - SPECIFICATION 71.100.80 INDIGENOUS - WATER TREATMENT CHEMICALS
238 MS 1836:2005 HYDRATED LIME AND SLURRY LIME FOR USE IN POTABLE WATER SUPPLY - SPECIFICATION 71.100.80 INDIGENOUS - WATER TREATMENT CHEMICALS
239 MS 873:2005 POWDERED ACTIVATED CARBON FOR USE IN POTABLE WATER SUPPLY - SPECIFICATION (FIRST REVISION) 71.100.80 INDIGENOUS - WATER TREATMENT CHEMICALS
240 MS ISO 20509:2006 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF OXIDATION RESISTANCE OF NON-OXIDE MONOLITHIC CERAMICS (ISO 20509:2003, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 20509:2003 FINE CERAMICS
241 MS ISO 20808:2006 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF FRICTION AND WEAR CHARACTERISTICS OF MONOLITHIC CERAMICS BY BALL-ON-DISC METHOD (ISO 20808:2004, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 20808:2004 FINE CERAMICS
242 MS ISO 24369:2006 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF CONTENT OF COARSE PARTICLES IN CERAMIC POWDERS BY WET SIEVING METHOD (ISO 24369:2005, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 24369:2005 FINE CERAMICS
243 MS 744:1981 (CONFIRMED:2006) SPECIFICATION FOR PHOTOGRAPHIC GRADE SODIUM THIOSULPHATE, ANHYDROUS 37.040.30 MODIFIED TO INTERNATIONAL STANDARD (RETYPE) ISO 3300:1976 GENERAL PURPOSE CHEMICALS
244 MS 745:1981 (CONFIRMED:2006) SPECIFICATION FOR PHOTOGRAPHIC GRADE SODIUM THIOSULPHATE, CRYSTALLINE 37.040.30 MODIFIED TO INTERNATIONAL STANDARD (RETYPE) ISO 419-1972 GENERAL PURPOSE CHEMICALS
245 MS 746:1981 (CONFIRMED:2006) SPECIFICATION FOR PHOTOGRAPHIC GRADE SODIUM SULPHITE, ANHYDROUS 37.040.30 MODIFIED TO INTERNATIONAL STANDARD (RETYPE) ISO 418:1976 GENERAL PURPOSE CHEMICALS
246 MS 755:1981 (CONFIRMED:2006) SPECIFICATION FOR PHOTOGRAPHIC GRADE SODIUM METABISULPHITE, ANHYDROUS 37.040.30 MODIFIED TO INTERNATIONAL STANDARD (RETYPE) ISO 3627:1976 GENERAL PURPOSE CHEMICALS
247 MS 2014:2006 PESTICIDES AND OTHER AGROCHEMICALS - COMMON NAMES (ISO 1750:1981 AND ITS AMENDMENT 1:1982, ADDENDUM 1:1983, ADDENDUM 2:1983, AMENDMENT 2:1999, AMENDMENT 3:2001, MOD) 65.100.01 MODIFIED TO INTERNATIONAL STANDARD ISO 1750:1981 PESTICIDES AND AGROCHEMICALS
248 MS ISO 257:2006 PESTICIDES AND OTHER AGROCHEMICALS - PRINCIPLES FOR THE SELECTION OF COMMON NAMES (ISO 257:1988, IDT) 65.100.01 IDENTICAL TO INTERNATIONAL STANDARD ISO 257:1988 PESTICIDES AND AGROCHEMICALS
249 MS ISO 765:2006 PESTICIDES CONSIDERED NOT TO REQUIRE COMMON NAMES (ISO 765:1976, IDT) 65.100.01 IDENTICAL TO INTERNATIONAL STANDARD ISO 765:1976 PESTICIDES AND AGROCHEMICALS
250 MS 1850: PART 10:2006 WATER QUALITY - SAMPLING - PART 10: GUIDANCE ON SAMPLING OF WASTE WATERS (ISO 5667 - PART 10:1992, IDT) 13.060.45 IDENTICAL TO INTERNATIONAL STANDARD ISO 5667 - PART 10:1992 SAMPLINGS (WATER QUALITY)
251 MS 1850: PART 11:2006 WATER QUALITY - SAMPLING - PART 11: GUIDANCE ON SAMPLING OF GROUNDWATERS (ISO 5667: PART 11:1993, IDT) 13.060.45 IDENTICAL TO INTERNATIONAL STANDARD ISO 5667: PART 11:1993 SAMPLINGS (WATER QUALITY)
252 MS 1850: PART 13:2006 WATER QUALITY - SAMPLING - PART 13: GUIDANCE ON SAMPLING OF SLUDGES FROM SEWAGE AND WATER TREATMENT WORKS (ISO 5667 - PART 13:1997, IDT) 13.060.45 IDENTICAL TO INTERNATIONAL STANDARD ISO 5667 - PART 13:1997 SAMPLINGS (WATER QUALITY)
253 MS 1850: PART 15:2006 WATER QUALITY - SAMPLING - PART 15: GUIDANCE ON PRESERVATION AND HANDLING OF SLUDGE AND SEDIMENT SAMPLES (ISO 5667- PART 15:1999, IDT) 13.060.45 IDENTICAL TO INTERNATIONAL STANDARD ISO 5667- PART 15:1999 SAMPLINGS (WATER QUALITY)
254 MS 1850: PART 6:2006 WATER QUALITY - SAMPLING - PART 6: GUIDANCE ON SAMPLING OF RIVERS AND STREAMS (ISO 5667 - PART 6:1990, IDT) 13.060.45 IDENTICAL TO INTERNATIONAL STANDARD ISO 5667 - PART 6:1990 SAMPLINGS (WATER QUALITY)
255 MS 1880: PART 1:2006 SOIL QUALITY - VOCABULARY PART 1: TERMS AND DEFINITIONS RELATING TO THE PROTECTION AND POLLUTION OF THE SOIL (ISO 11074-1:1996, MOD) 13.080.01 MODIFIED TO INTERNATIONAL STANDARD ISO 11074-1:1996 SOIL QUALITY
256 MS ISO 11475:2006 PAPER AND BOARD - DETERMINATION OF CIE WHITENESS, D65/10 (OUTDOOR DAYLIGHT) (ISO 11475:2004, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 11475:2004 PULP, PAPER AND BOARD
257 MS ISO 4046-1:2006 PAPER, BOARD, PULPS AND RELATED TERMS - VOCABULARY - PART 1: ALPHABETICAL INDEX (ISO 4046-1:2002, IDT) 85.020 IDENTICAL TO INTERNATIONAL STANDARD ISO 4046-1:2002 PULP, PAPER AND BOARD
258 MS ISO 4046-2:2006 PAPER, BOARD, PULPS AND RELATED TERMS - VOCABULARY - PART 2: PULPING TERMINOLOGY (ISO 4046-2:2006, IDT) 85.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 4046-2:2006 PULP, PAPER AND BOARD
259 MS ISO 4046-3:2006 PAPER, BOARD, PULPS AND RELATED TERMS - VOCABULARY - PART 3: PAPER-MAKING TERMINOLOGY (ISO 4046-3:2002, IDT) 85.020 IDENTICAL TO INTERNATIONAL STANDARD ISO 4046-3:2002 PULP, PAPER AND BOARD
260 MS ISO 4046-4:2006 PAPER, BOARD, PULPS AND RELATED TERMS - VOCABULARY - PART 4: PAPER AND BOARD GRADES AND CONVERTED PRODUCTS 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 4046-4:2006 PULP, PAPER AND BOARD
261 MS ISO 4046-5:2006 PAPER, BOARD, PULPS AND RELATED TERMS - VOCABULARY - PART 5: PROPERTIES OF PULP, PAPER AND BOARD 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 4046-5:2002 PULP, PAPER AND BOARD
262 MS ISO 6588-1:2006 PAPER, BOARD AND PULPS - DETERMINATION OF pH OF AQUEOUS EXTRACTS - PART 1: COLD EXTRACTION (ISO 6588-1:2005, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 6588-1:2005 PULP, PAPER AND BOARD
263 MS ISO 6588-2:2006 PAPER, BOARD AND PULPS - DETERMINATION OF pH OF AQUEOUS EXTRACTS - PART 2: HOT EXTRACTION (ISO 6588-2:2005, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 6588-2:2005 PULP, PAPER AND BOARD
264 MS 1920:2006 ENGINE COOLANT - ETHYLENE GLYCOL BASE FOR AUTOMOBILE AND LIGHT DUTY SERVICE - SPECIFICATION 71.080 INDIGENOUS - GENERAL PURPOSE CHEMICALS
265 MS 1922:2006 TEST METHOD FOR pH OF ENGINE COOLANTS AND ANTIRUSTS 71.080 ADAPTED FROM INTERNATIONAL STANDARD ASTM D 1287-91 GENERAL PURPOSE CHEMICALS
266 MS 820:1983 (CONFIRMED:2006) SPECIFICATION FOR SODIUM METABISULPHITE, TECHNICAL GRADE 71.040.40 INDIGENOUS IS 248:1971 GENERAL PURPOSE CHEMICALS
267 MS 879:1984 (CONFIRMED: 2006) SPECIFICATION FOR SODIUM SULPHITE, TECHNICAL GRADE 71.060.50 INDIGENOUS IS 247:1972, ISO 418:1976 GENERAL PURPOSE CHEMICALS
268 MS 1255:2006 HOUSEHOLD INSECTICIDE PRODUCTS - PHYSICAL, CHEMICAL AND BIOLOGICAL EFFICACY REQUIREMENTS - SURFACE AND DIRECT SPRAY AEROSOL (FIRST REVISION) 65.100.10, 71.100.99 INDIGENOUS - HOUSEHOLD PESTICIDES
269 MS 1911: PART 1:2006 HOUSEHOLD INSECTICIDE PRODUCTS - EVALUATION METHOD FOR BIOLOGICAL EFFICACY - PART 1: GLASS CHAMBER METHOD 65.100.10, 71.100.99 INDIGENOUS - HOUSEHOLD PESTICIDES
270 MS 1911: PART 2:2006 HOUSEHOLD INSECTICIDE PRODUCTS - EVALUATION METHOD FOR BIOLOGICAL EFFICACY - PART 2: PEET GRADY METHOD 65.100.10, 71.100.99 INDIGENOUS - HOUSEHOLD PESTICIDES
271 MS 1911: PART 3:2006 HOUSEHOLD INSECTICIDE PRODUCTS - EVALUATION METHOD FOR BIOLOGICAL EFFICACY - PART 3: CYLINDER METHOD 65.100.10, 71.100.99 INDIGENOUS - HOUSEHOLD PESTICIDES
272 MS 1911: PART 4:2006 HOUSEHOLD INSECTICIDE PRODUCTS - EVALUATION METHOD FOR BIOLOGICAL EFFICACY - PART 4: PLAQUE METHOD 65.100.10, 71.100.99 INDIGENOUS - HOUSEHOLD PESTICIDES
273 MS 2037:2006 WATER QUALITY - DETERMINATION OF TOTAL SUSPENDED SOLIDS BY FILTRATION THROUGH GLASS-FIBRE FILTERS 13.060.60 INDIGENOUS - PHYSICAL, CHEMICAL, BIOCHEMICAL TEST METHODS (WATER QUALITY)
274 MS 330:1976 (CONFIRMED:2006) SPECIFICATION FOR HIGH WET-STRENGTH GREASEPROOF PAPER 85.080 ADAPTED FROM INTERNATIONAL STANDARD AS N77-1971 PULP, PAPER AND BOARD
275 MS ISO 17092:2007 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF CORROSION RESISTANCE OF MONOLITHIC CERAMICS IN ACID AND ALKALINE SOLUTIONS (ISO 17092:2005, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 17092:2005 FINE CERAMICS
276 MS ISO 18452:2007 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF THICKNESS OF CERAMIC FILMS BY CONTACT-PROBE PROFILOMETER (ISO 18452:2005, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 18452:2005 FINE CERAMICS
277 MS ISO 18753:2007 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF ABSOLUTE DENSITY OF CERAMIC POWDERS BY PYKNOMETER
(ISO 18753:2004, IDT)
81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 18753:2004 FINE CERAMICS
278 MS ISO 20505:2007 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF THE INTERLAMINAR SHEAR STRENGTH OF CONTINUOUS-FIBRE-REINFORCED COMPOSITES AT AMBIENT TEMPERATURE BY THE COMPRESSION OF DOUBLE-NOTCHED TEST PIECES AND BY THE LOSIPESCU TEST (ISO 20505:2005, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 20505:2005 FINE CERAMICS
279 MS ISO 20506:2007 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF THE IN-PLANE SHEAR STRENGTH OF CONTINUOUS-FIBRE-REINFORCED COMPOSITES AT AMBIENT TEMPERATURE BY LOSIPESCU TEST (ISO 20506:2005, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 20506:2005 FINE CERAMICS
280 MS ISO 24370:2007 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE BY CHEVRON-NOTCHED BEAM (CNB) METHOD (ISO 24370:2005, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 24370:2005 FINE CERAMICS
281 MS 1888:2007 WATER QUALITY - DETECTION AND ENUMERATION OF COLIFORM ORGANISMS, THERMOTOLERANT COLIFORM ORGANISMS AND PRESUMPTIVE ESCHERICHIA COLI - MULTIPLE TUBE (MOST PROBABLE NUMBER) METHOD (ISO 9308-2:1990, MOD) 07.100.20 MODIFIED TO INTERNATIONAL STANDARD ISO 9308-2:1990 MICROBIOLOGICAL & BIOLOGICAL METHODS (WATER QUALITY)
282 MS ISO 5667: PART 17:2007 WATER QUALITY - SAMPLING - PART 17: GUIDANCE ON SAMPLING OF SUSPENDED SEDIMENTS (ISO 5667-17:2000, IDT) 13.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 5667-17:2000 SAMPLINGS (WATER QUALITY)
283 MS ISO 5667: PART 18:2007 WATER QUALITY - SAMPLING - PART 18: GUIDANCE ON SAMPLING OF GROUNDWATER AT CONTAMINATED AREAS (ISO 5667-18:2001, MOD) 13.060 MODIFIED TO INTERNATIONAL STANDARD ISO 5667-18:2001 SAMPLINGS (WATER QUALITY)
284 MS ISO 2272:2007 SURFACE ACTIVE AGENTS - SOAPS - DETERMINATION OF LOW CONTENTS OF FREE GLYCEROL BY MOLECULAR ABSORPTION SPECTROMETRY (ISO 2272:1989, IDT) 71.100.40 IDENTICAL TO INTERNATIONAL STANDARD ISO 2272:1989, SOAPS AND DETERGENTS
285 MS ISO 11093-4:2007 PAPER AND BOARD - TESTING OF CORES - PART 4: MEASUREMENT OF DIMENSIONS (ISO 11093-4:1997, IDT) 85.080 IDENTICAL TO INTERNATIONAL STANDARD ISO 11093-4:1997 PULP, PAPER AND BOARD
286 MS ISO 2758:2007 PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2001, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 2758:2001 PULP, PAPER AND BOARD
287 MS ISO 2759:2007 BOARD - DETERMINATION OF BURSTING STRENGTH (ISO 2759:2001) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 2759:2001 PULP, PAPER AND BOARD
288 MS ISO 534:2007 PAPER AND BOARD - DETERMINATION OF THICKNESS, DENSITY AND SPECIFIC VOLUME (ISO 534:2005, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 534:2005 PULP, PAPER AND BOARD
289 MS 1326: PART 3:2007 HOUSEHOLD INSECTICIDE PRODUCTS-COCKROACH BAIT-EVALUATION METHOD FOR BIOLOGICAL EFFICACY (SECOND REVISION) 65.100.10, 71.100.99 INDIGENOUS - HOUSEHOLD PESTICIDES
290 MS 1497:2007 HOUSEHOLD INSECTICIDE PRODUCTS - PERSONAL MOSQUITO REPELLENT - EVALUATION METHOD FOR BIOLOGICAL EFFICACY (FIRST REVISION) 65.100.10, 71.100.99 INDIGENOUS - HOUSEHOLD PESTICIDES
291 MS 1985:2007 HOUSEHOLD INSECTICIDE PRODUCTS - ANT BAIT - EVALUATION METHOD FOR BIOLOGICAL EFFICACY 65.100.10, 71.100.99 INDIGENOUS - HOUSEHOLD PESTICIDES
292 MS 1986:2007 HOUSEHOLD INSECTICIDE PRODUCTS - CONTAINERISED ANT BAIT - SPECIFICATION 65.100.10 INDIGENOUS - HOUSEHOLD PESTICIDES
293 MS 1999:2007 SURFACE ACTIVE AGENTS - DETERMINATION OF FOAMING POWER - PERFORATED DISC BEATING METHOD 71.100.40 ADAPTED FROM INTERNATIONAL STANDARD EN 12728:1999 SOAPS AND DETERGENTS
294 MS 2006:2007 SURFACE ACTIVE AGENTS - FOAMING POWER AND ANTIFOAMING POWER - TURBINE STIRRING METHOD 71.100.40 ADAPTED FROM INTERNATIONAL STANDARD EN 13996:2002 SOAPS AND DETERGENTS
295 MS 134:2007 LATEX EMULSION PAINT FOR EXTERIOR AND INTERIOR USE - SPECIFICATION (THIRD REVISION) 87.040 INDIGENOUS - PAINTS AND VARNISHES
296 MS 164:2007 ROAD MARKING PAINTS - SPECIFICATION (THIRD REVISION) 87.040 INDIGENOUS - PAINTS AND VARNISHES
297 MS 1454:2007 LIQUID POLYALUMINIUM CHLORIDE FOR USE IN POTABLE WATER SUPPLY - SPECIFICATION (FIRST REVISION) 71.100.80 INDIGENOUS - WATER TREATMENT CHEMICALS
298 MS 1928:2007 POLYACRYLAMIDES FOR USE IN PORTABLE WATER SUPPLY - SPECIFICATION 71.100.80 INDIGENOUS - WATER TREATMENT CHEMICALS
299 MS 1929:2007 POLYAMINES FOR USE IN POTABLE WATER SUPPLY - SPECIFICATION 71.100.80 INDIGENOUS - WATER TREATMENT CHEMICALS
300 MS 1930:2007 POLY(DIALLYLDIMETHYLAMMONIUM CHLORIDE) FOR USE IN POTABLE WATER SUPPLY - SPECIFICATION 71.100.80 INDIGENOUS - WATER TREATMENT CHEMICALS
301 MS 1931:2007 PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - EXPANDED ALUMINOSILICATE 71.100.80 INDIGENOUS - WATER TREATMENT CHEMICALS
302 MS ISO 17561:2008 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR ELASTIC MODULI OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE BY SONIC RESONANCE (ISO 17561:2002/Cor 1:2007, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 17561:2002/Cor 1:2007 FINE CERAMICS
303 MS ISO 17565:2008 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FLEXURAL STRENGTH OF MONOLITHIC CERAMICS AT ELEVATED TEMPERATURE (ISO 17565:2003, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 17565:2003 FINE CERAMICS
304 MS ISO 18756:2008 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE BY THE SURFACE CRACK IN FLEXURE (SCF) METHOD (ISO 18756:2003, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 18756:2003 FINE CERAMICS
305 MS ISO 18757:2008 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF SPECIFIC SURFACE AREA OF CERAMIC POWDERS BY GAS ADSORPTION USING THE BET METHOD (ISO 18757:2003, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 18757:2003 FINE CERAMICS
306 MS ISO 20507:2008 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - VOCABULARY (ISO 20507:2003, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 20507:2003 FINE CERAMICS
307 MS ISO 20508:2008 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF LIGHT TRANSMITTANCE OF CERAMIC FILMS WITH TRANSPARENT SUBSTRATE (FIRST REVISION) (ISO 20508:2003, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 20508:2003 FINE CERAMICS
308 MS ISO 22197-1:2008 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - PART 1: REMOVAL OF NITRIC OXIDE (ISO 22197-1:2007, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 22197-1:2007 FINE CERAMICS
309 MS ISO 13829:2008 WATER QUALITY - DETERMINATION OF THE GENOTOXICITY OF WATER AND WASTE WATER USING THE UMU-TEST (ISO 13829:2000, IDT) 13.060.70 IDENTICAL TO INTERNATIONAL STANDARD ISO 13829:2000 MICROBIOLOGICAL & BIOLOGICAL METHODS (WATER QUALITY)
310 MS 133: PART A1:2008 PAINTS, VARNISHES AND RAW MATERIALS FOR PAINTS AND VARNISHES - PART A1: SAMPLING (SECOND REVISION) (ISO 15528:2000, IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 15528:2000 PAINTS AND VARNISHES
311 MS 133: PART A10:2008 PAINTS AND VARNISHES - DETERMINATION OF FLASH POINT - PART A10 - CLOSED CUP EQUILIBRIUM METHOD (SECOND REVISION) (ISO 1523:2002, IDT) 87.040, 75.080 IDENTICAL TO INTERNATIONAL STANDARD ISO 1523:2002 PAINTS AND VARNISHES
312 MS 133: PART A12:2008 PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART A12: PYKNOMETER METHOD (SECOND REVISION) (ISO 2811-1:1997, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 2811-1:1997 PAINTS AND VARNISHES
313 MS 133: PART A2:2008 PAINTS AND VARNISHES - PART A2: EXAMINATION AND PREPARATION OF SAMPLES FOR TESTING (SECOND REVISION) (ISO 1513:1992, COR. 1:1994, IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 1513:1992, COR. 1:1994 PAINTS AND VARNISHES
314 MS 133: PART A3:2008 PAINTS AND VARNISHES - PART A3: STANDARD PANELS FOR TESTING (SECOND REVISION) (ISO 1514:2004, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 1514:2004 PAINTS AND VARNISHES
315 MS 133: PART A7:2008 PAINTS AND VARNISHES - DETERMINATION OF VISCOSITY USING ROTARY VISCOMETERS - PART A7: CONE-AND-PLATE VISCOMETER OPERATED AT A HIGH RATE OF SHEAR (SECOND REVISION)(ISO 2884-1:1999, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 2884-1:1999 PAINTS AND VARNISHES
316 MS 133: PART F19:2008 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART F19: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2000 (2005), IDT)  87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 11997-2:2000 (2005) PAINTS AND VARNISHES
317 MS 133: PART F20:2008 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART F20: ALUMINIUM SUBSTRATES (ISO 4623-2:2003, COR. 1:2005, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 4623-2:2003, COR. 1:2005 PAINTS AND VARNISHES
318 MS 133: PART F21:2008 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO HUMIDITY - PART F21: PROCEDURE FOR EXPOSING TEST SPECIMENS IN CONDENSATION-WATER ATMOSPHERES (ISO 6270-2:2005, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 6270-2:2005 PAINTS AND VARNISHES
319 MS 133: PART F8:2008 PAINTS AND VARNISHES - PART F8: DETERMINATION OF RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE (ISO 3231:1993 (2003), MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 3231:1993 (2003) PAINTS AND VARNISHES
320 MS 133: PART G10:2008 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART G10: METHOD USING AN ABSORBENT MEDIUM (ISO 2812-3:2007, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 2812-3:2007 PAINTS AND VARNISHES
321 MS 133: PART G11:2008 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS -PART G11: SPOTTING METHODS (ISO 2812-4:2007, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 2812-4:2007 PAINTS AND VARNISHES
322 MS 133: PART G12:2008 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS -PART G12: TEMPERATURE-GRADIENT OVEN METHOD (ISO 2812-5:2007, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 2812-5:2007 PAINTS AND VARNISHES
323 MS 133: PART G5:2008 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART G5: IMMERSION IN LIQUIDS OTHER THAN WATER (FIRST REVISION) (ISO 2812-1:2007, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 2812-1:2007 PAINTS AND VARNISHES
324 MS 133: PART G7:2008 PAINTS AND VARNISHES - PART G7: DETERMINATION OF THE EFFECT OF HEAT (ISO 3248:1998 (2003), MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 3248:1998 (2003) PAINTS AND VARNISHES
325 MS 133: PART G8:2008 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART G8: WATER IMMERSION METHOD (ISO 2812-2:2007, IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 2812-2:2007 PAINTS AND VARNISHES
326 MS 133: PART G9:2008 PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION RATE - PART G9: DISH METHOD FOR FREE FILMS (ISO 7783-1:1996/COR.1:1998, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 7783-1:1996/COR.1:1998 PAINTS AND VARNISHES
327 MS 133: PART H1:2008 PAINTS AND VARNISHES - EVALUATION OF DEGR√TION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART H1: GENERAL INTRODUCTION AND DESIGNATION SYSTEM (FIRST REVISION) (ISO 4628-1:2003, IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 4628-1:2003 PAINTS AND VARNISHES
328 MS 133: PART H10:2008 PAINTS AND VARNISHES - EVALUATION OF DEGR√TION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART H10: ASSESSMENT OF DEGREE OF FILIFORM CORROSION (ISO 4628-10:2003, IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 4628-10:2003 PAINTS AND VARNISHES
329 MS 133: PART H2:2008 PAINTS AND VARNISHES - EVALUATION OF DEGR√TION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART H2: ASSESSMENT OF DEGREE OF BLISTERING (FIRST REVISION) (ISO 4628-2:2003, IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 4628-2:2003 PAINTS AND VARNISHES
330 MS 133: PART H3:2008 PAINTS AND VARNISHES - EVALUATION OF DEGR√TION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART H3: ASSESSMENT OF DEGREE OF RUSTING (FIRST REVISION) (ISO 4628-3:2003, IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 4628-3:2003 PAINTS AND VARNISHES
331 MS 133: PART H4 : 2008 PAINTS AND VARNISHES - EVALUATION OF DEGR√TION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART H4: ASSESSMENT OF DEGREE OF CRACKING (FIRST REVISION) (ISO 4628-4:2003, IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 4628-4:2003 PAINTS AND VARNISHES
332 MS 133: PART H5:2008 PAINTS AND VARNISHES - EVALUATION OF DEGR√TION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART H5: ASSESSMENT OF DEGREE OF FLAKING (FIRST REVISION) (ISO 4628-5:2003, IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 4628-5:2003 PAINTS AND VARNISHES
333 MS 133: PART H6:2008 PAINTS AND VARNISHES - EVALUATION OF DEGR√TION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART H6: ASSESSMENT OF DEGREE OF OF CHALKING BY TAPE METHOD (ISO 4628-6:2007, IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 4628-6:2007 PAINTS AND VARNISHES
334 MS 133: PART H7:2008 PAINTS AND VARNISHES - EVALUATION OF DEGR√TION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART H7: ASSESSMENT OF DEGREE OF CHALKING BY VELVET METHOD (ISO 4628-7:2003, IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 4628-7:2003 PAINTS AND VARNISHES
335 MS 133: PART H8:2008 PAINTS AND VARNISHES - EVALUATION OF DEGR√TION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART H8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE (ISO 4628-8:2005, 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 4628-8:2005 PAINTS AND VARNISHES
336 MS 133: PART J1:2008 PAINTS AND VARNISHES - COATING POWDERS - PART J1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY SIEVING (ISO 8130-1:1992 (2007), IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 8130-1:1992 (2007) PAINTS AND VARNISHES
337 MS 133: PART J10:2008 PAINTS AND VARNISHES - COATING POWDERS - PART J10: DETERMINATION OF DEPOSITION EFFICIENCY (ISO 8130-10:1998 (2003), MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 8130-10:1998 (2003) PAINTS AND VARNISHES
338 MS 133: PART J11:2008 PAINTS AND VARNISHES - COATING POWDERS - PART J11: INCLINED-PLANE FLOW TEST (ISO 8130-11:1997(2007), IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 8130-11:1997(2007) PAINTS AND VARNISHES
339 MS 133: PART J12:2008 PAINTS AND VARNISHES - COATING POWDERS - PART J12: DETERMINATION OF COMPATIBILITY (ISO 8130-12:1998(2003), IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 8130-12:1998(2003) PAINTS AND VARNISHES
340 MS 133: PART J13:2008 PAINTS AND VARNISHES - COATING POWDERS - PART J13: PARTICLE SIZE ANALYSIS BY LASER DIFFRACTION (ISO 8130-13:2001 (2006), IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 8130-13:2001 (2006) PAINTS AND VARNISHES
341 MS 133: PART J2:2008 PAINTS AND VARNISHES - COATING POWDERS - PART J2: DETERMINATION OF DENSITY BY GAS COMPARISON PYKNOMETER (REFEREE METHOD) (ISO 8130-2:1992 (2007), MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 8130-2:1992 (2007) PAINTS AND VARNISHES
342 MS 133: PART J3:2008 PAINTS AND VARNISHES - COATING POWDERS - PART J3: DETERMINATION OF DENSITY BY LIQUID DISPLACEMENT PYKNOMETER (ISO 8130-3:1992 (2007), MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 8130-3:1992 (2007) PAINTS AND VARNISHES
343 MS 133: PART J4:2008 PAINTS AND VARNISHES - COATING POWDERS - PART J4: CALCULATION OF LOWER EXPLOSION LIMIT (ISO 8130-4:1992 (2007), COR 1:1993, IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 8130-4:1992 (2007), COR 1:1993, IDT PAINTS AND VARNISHES
344 MS 133: PART J5:2008 PAINTS AND VARNISHES - COATING POWDERS - PART J5: DETERMINATION OF FLOW PROPERTIES OF A POWDER/AIR MIXTURE (ISO 8130-5:1992 (2007), IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 8130-5:1992 (2007) PAINTS AND VARNISHES
345 MS 133: PART J6:2008 PAINTS AND VARNISHES - COATING POWDERS - PART J6: DETERMINATION OF GEL TIME OF THERMOSETTING COATING POWDERS AT A GIVEN TEMPERATURE (ISO 8130-6:1992 (2007) AND ITS AMENDMENT 1:1998, IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 8130-6:1992 (2007) AND ITS AMENDMENT 1:1998 PAINTS AND VARNISHES
346 MS 133: PART J7:2008 PAINTS AND VARNISHES - COATING POWDERS - PART J7: DETERMINATION OF LOSS OF MASS ON STOVING (ISO 8130-7:1992 (2007), IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 8130-7:1992 (2007) PAINTS AND VARNISHES
347 MS 133: PART J8:2008 PAINTS AND VARNISHES - COATING POWDERS - PART J8: ASSESSMENT OF THE STORAGE STABILITY OF THERMOSETTING POWDERS (ISO 8130-8:1994(2004), MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 8130-8:1994(2004) PAINTS AND VARNISHES
348 MS 133: PART J9:2008 PAINTS AND VARNISHES - COATING POWDERS - PART J9: SAMPLING (ISO 8130-9:1992 (2007), IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 8130-9:1992 (2007) PAINTS AND VARNISHES
349 MS ISO 11093-7:2008 PAPER AND BOARD - TESTING OF CORES - PART 7: DETERMINATION OF FLEXURAL MODULUS BY THE THREE-POINT METHOD (ISO 11093-7:1997, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 11093-7:1997 PULP, PAPER AND BOARD
350 MS ISO 11093-8:2008 PAPER AND BOARD - TESTING OF CORES - PART 8: DETERMINATION OF NATURAL FREQUENCY AND FLEXURAL MODULUS BY EXPERIMENTAL MODAL ANALYSIS (ISO 11093-8:1997, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 11093-8:1997 PULP, PAPER AND BOARD
351 MS ISO 22891:2008 PAPER - DETERMINATION OF TRANMITTANCE BY DIFFUSE REFLECTANCE MEASUREMENT (ISO 22891:2007, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 22891:2007 PULP, PAPER AND BOARD
352 MS ISO 23714:2008 PULPS - DETERMINATION OF WATER RETENTION VALUE (WRV) (ISO 23714:2007, IDT) 85.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 23714:2007 PULP, PAPER AND BOARD
353 MS ISO 2469:2008 PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE RADIANCE FACTOR
(FIRST REVISION) (ISO 2469:2007, IDT)
85.040, 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 2469:2007 PULP, PAPER AND BOARD
354 MS ISO 3037:2008 CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) (ISO 3037:2007, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 3037:2007 PULP, PAPER AND BOARD
355 MS 511:2008 ZINC OXIDE FOR USE IN RUBBER - SPECIFICATION (FIRST REVISION) 71.060.20 INDIGENOUS - GENERAL PURPOSE CHEMICALS
356 MS 699:2008 ALUMINIUM SULPHATE USED FOR POTABLE WATER SUPPLY - SPECIFICATION (SECOND REVISION) 71.100.80 INDIGENOUS - WATER TREATMENT CHEMICALS
357 MS ISO 14704:2009 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FLEXURAL STRENGTH OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE (FIRST REVISION) (ISO 14704:2008, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 14704:2008 FINE CERAMICS
358 MS ISO 14705:2009 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR HARDNESS OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE (FIRST REVISION) (ISO 14705:2008, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 14705:2008 FINE CERAMICS
359 MS ISO 26423:2009 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF COATING THICKNESS BY CRATER-GRINDING METHOD (ISO 26423:2009, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 26423:2009 FINE CERAMICS
360 MS ISO 26602:2009 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - SILICON NITRIDE MATERIALS FOR ROLLING BEARING BALLS (ISO 26602:2009, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 26602:2009 FINE CERAMICS
361 MS 1850-14:2009 WATER QUALITY - SAMPLING - PART 14: GUIDANCE ON QUALITY ASSURANCE OF ENVIRONMENTAL WATER SAMPLING AND HANDLING (ISO 5667- 14: 1998, IDT) 13.060.45 IDENTICAL TO INTERNATIONAL STANDARD ISO 5667- 14: 1998 SAMPLINGS (WATER QUALITY)
362 MS 1880-2:2009 SOIL QUALITY - VOCABULARY PART 2: TERMS AND DEFINITIONS RELATING TO SAMPLING (ISO 11074-2:2005, MOD) 13.080.01 MODIFIED TO INTERNATIONAL STANDARD ISO 11074-2:2005 SOIL QUALITY
363 MS ISO 217:2009 PAPER - UNTRIMMED SIZES - DESIGNATION AND TOLERANCES FOR PRIMARY AND SUPPLEMENTARY RANGES, AND INDICATION OF MACHINE DIRECTION (ISO 217:2008, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 217:2008 PULP, PAPER AND BOARD
364 MS ISO 302:2009 PULPS - DETERMINATION OF KAPPA NUMBER (ISO 302:2004, IDT) 85.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 302:2004 PULP, PAPER AND BOARD
365 MS ISO 5631-2:2009 PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 2: OUTDOOR DAYLIGHT CONDITIONS (D65/10 DEGREES) (ISO 5631-2:2008, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 5631-2:2008 PULP, PAPER AND BOARD
366 MS ISO 5631-3:2009 PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 3: INDOOR ILLUMINATION CONDITIONS (D50/2 DEGREES) (ISO 5631-3:2008, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 5631-3:2008 PULP, PAPER AND BOARD
367 MS 1817:2009 CERAMIC TABLEWARE - SPECIFICATION (FIRST REVISION) 67.250, 81.040.30, 81.060.20, 97.040.60 INDIGENOUS - CLAY & CLAY PRODUCTS
368 MS 2258:2009 QUICKLIME, HYDRATED LIME, PUTTY LIME AND LIMESTONE FOR CHEMICAL AND INDUSTRIAL USES - SPECIFICATION 91.100.10 INDIGENOUS - LIME & LIME PRODUCTS
369 MS ISO 1388-1:2010 ETHANOL FOR INDUSTRIAL USE - METHODS OF TEST - PART 1 : GENERAL (ISO 1388-1:1981, IDT) 71.080.60 IDENTICAL TO INTERNATIONAL STANDARD ISO 1388-1:1981 GENERAL PURPOSE CHEMICALS
370 MS ISO 1388-12:2010 ETHANOL FOR INDUSTRIAL USE - METHODS OF TEST - PART 12 : DETERMINATION OF PERMANGANATE TIME (ISO 1388-12:1981, IDT) 71.080.60 IDENTICAL TO INTERNATIONAL STANDARD ISO 1388-12:1981 GENERAL PURPOSE CHEMICALS
371 MS ISO 1388-2:2010 ETHANOL FOR INDUSTRIAL USE - METHODS OF TEST - PART 2 : DETECTION OF ALKALINITY OR DETERMINATION OF ACIDITY TO PHENOLPHTHALEIN (ISO 1388-2:1981, IDT) 71.080.60 IDENTICAL TO INTERNATIONAL STANDARD ISO 1388-2:1981 GENERAL PURPOSE CHEMICALS
372 MS ISO 1388-4:2010 ETHANOL FOR INDUSTRIAL USE - METHODS OF TEST - PART 4 : ESTIMATION OF CONTENT OF CARBONYL COMPOUNDS PRESENT IN MODERATE AMOUNTS - TITRIMETRIC METHOD (ISO 1388-4:1981, IDT) 71.080.60 IDENTICAL TO INTERNATIONAL STANDARD ISO 1388-4:1981 GENERAL PURPOSE CHEMICALS
373 MS ISO 1388-6:2010 ETHANOL FOR INDUSTRIAL USE - METHODS OF TEST - PART 6 : TEST FOR MISCIBILITY WITH WATER (ISO 1388-6:1981, IDT) 71.080.60 IDENTICAL TO INTERNATIONAL STANDARD ISO 1388-6:1981 GENERAL PURPOSE CHEMICALS
374 MS ISO 1388-7:2010 ETHANOL FOR INDUSTRIAL USE - METHODS OF TEST - PART 7 : DETERMINATION OF METHANOL CONTENT [METHANOL CONTENTS BETWEEN 0.01 AND 0.20 % (V/V)] - PHOTOMETRIC METHOD (ISO 1388-7:1981, IDT) 71.080.60 IDENTICAL TO INTERNATIONAL STANDARD ISO 1388-7:1981 GENERAL PURPOSE CHEMICALS
375 MS ISO 2211:2010 LIQUID CHEMICAL PRODUCTS - MEASUREMENT OF COLOUR IN HAZEN UNITS (PLATINUM-COBALT SCALE) (ISO 2211:1973, IDT) 71.040.50 IDENTICAL TO INTERNATIONAL STANDARD ISO 2211:1973 GENERAL PURPOSE CHEMICALS
376 MS ISO 759:2010 VOLATILE ORGANIC LIQUIDS FOR INDUSTRIAL USE - DETERMINATION OF DRY RESIDUE AFTER EVAPORATION ON A WATER BATH - GENERAL METHOD(ISO 759:1981, IDT) 71.040.40 IDENTICAL TO INTERNATIONAL STANDARD ISO 759:1981 GENERAL PURPOSE CHEMICALS
377 MS ISO 1065:2010 NON-IONIC SURFACE-ACTIVE AGENTS OBTAINED FROM ETHYLENE OXIDE AND MIXED NON-IONIC SURFACE-ACTIVE AGENTS - DETERMINATION OF CLOUD POINT (ISO 1065:1991, IDT) 71.100.40 IDENTICAL TO INTERNATIONAL STANDARD ISO 1065:1991 SOAPS AND DETERGENTS
378 MS ISO 2870:2010 SURFACE ACTIVE AGENTS - DETERGENTS - DETERMINATION OF ANIONIC-ACTIVE MATTER HYDROLYSABLE AND NON-HYDROLYSABLE UNDER ACID CONDITIONS (ISO 2870:2009, IDT) 71.100.40 IDENTICAL TO INTERNATIONAL STANDARD ISO 2870:2009 SOAPS AND DETERGENTS
379 MS ISO 4313:2010 WASHING POWDERS - DETERMINATION OF TOTAL PHOSPHORUS (V) OXIDE CONTENT - QUINOLINE PHOSPHOMOLYBDATE GRAVIMETRIC METHOD (ISO 4313:1976, IDT) 71.100.40 IDENTICAL TO INTERNATIONAL STANDARD ISO 4313:1976 SOAPS AND DETERGENTS
380 MS ISO 6841:2010 SURFACE ACTIVE AGENTS - TECHNICAL STRAIGHT-CHAIN SODIUM ALKYLBENZENESULFONATES - DETERMINATION OF MEAN RELATIVE MOLECULAR MASS BY GAS-LIQUID CHROMATOGRAPHY (ISO 6841:1988, IDT) 71.100.40 IDENTICAL TO INTERNATIONAL STANDARD ISO 6841:1988 SOAPS AND DETERGENTS
381 MS ISO 8799:2010 SURFACE ACTIVE AGENTS - SULFATED ETHOXYLATED ALCOHOLS AND ALKYLPHENOLS - DETERMINATION OF CONTENT OF UNSULFATED MATTER (ISO 8799:2009, IDT) 71.100.40 IDENTICAL TO INTERNATIONAL STANDARD ISO 8799:2009 SOAPS AND DETERGENTS
382 MS ISO 10703:2010 WATER QUALITY - DETERMINATION OF THE ACTIVITY CONCENTRATION OF RADIONUCLIDES - METHOD BY HIGH RESOLUTION GAMMA-RAY SPECTROMETRY (FIRST REVISION) (ISO 10703:2007, IDT) 13.060.60, 17.240 IDENTICAL TO INTERNATIONAL STANDARD ISO 10703:2007 WATER QUALITY
383 MS ISO 6107-1:2010 WATER QUALITY - VOCABULARY - PART 1 (FIRST REVISION) (ISO 6107-1:2004, IDT) 13.060.01, 01.040.13;   IDENTICAL TO INTERNATIONAL STANDARD ISO 6107-1:2004 WATER QUALITY
384 MS ISO 6107-2:2010 WATER QUALITY - VOCABULARY - PART 2 (FIRST REVISION) (ISO 6107-2:2006, IDT) 13.060.01, 01.040.13;   IDENTICAL TO INTERNATIONAL STANDARD ISO 6107-2:2006 WATER QUALITY
385 MS ISO 6107-5:2010 WATER QUALITY - VOCABULARY - PART 5 (FIRST REVISION) (ISO 6107-5:2004, IDT) 13.060.01, 01.040.13;   IDENTICAL TO INTERNATIONAL STANDARD ISO 6107-5:2004 WATER QUALITY
386 MS ISO 6107-6:2010 WATER QUALITY - VOCABULARY - PART 6 (FIRST REVISION) (ISO 6107-6:2004, IDT) 13.060.01, 01.040.13;   IDENTICAL TO INTERNATIONAL STANDARD ISO 6107-6:2004 WATER QUALITY
387 MS ISO 6107-7:2010 WATER QUALITY - VOCABULARY - PART 7 (FIRST REVISION) (ISO 6107-7:2006, IDT) 13.060.01, 01.040.13;   IDENTICAL TO INTERNATIONAL STANDARD ISO 6107-7:2006 WATER QUALITY
388 MS ISO 9696:2010 WATER QUALITY - MEASUREMENT OF GROSS ALPHA ACTIVITY IN NON-SALINE WATER - THICK SOURCE METHOD (FIRST REVISION) (ISO 9696:2007, IDT) 13.060.60, 17.240 IDENTICAL TO INTERNATIONAL STANDARD ISO 9696:2007 WATER QUALITY
389 MS 133-A15:2010 PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART A15: IMMERSED BODY (PLUMMET) METHOD (ISO 2811-2:1997, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 2811-2:1997 PAINTS AND VARNISHES
390 MS 133-A16:2010 PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART A16: OSCILLATION METHOD (ISO 2811-3:1997, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 2811-3:1997 PAINTS AND VARNISHES
391 MS 133-A17:2010 PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART A17: PRESSURE CUP METHOD (ISO 2811-4:1997, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 2811-4:1997 PAINTS AND VARNISHES
392 MS 133-A18:2010 PAINTS AND VARNISHES - DETERMINATION OF THE POT LIFE OF MULTICOMPONENT COATING SYSTEMS - PART A18: PREPARATION AND CONDITIONING OF SAMPLES AND GUIDELINES FOR TESTING (ISO 9514:2005, IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 9514:2005 PAINTS AND VARNISHES
393 MS 133-A19:2010 PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART A19: DIFFERENCE METHOD (ISO 11890-1:2007, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 11890-1:2007 PAINTS AND VARNISHES
394 MS 133-A20:2010 PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART A20: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2006, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 11890-2:2006 PAINTS AND VARNISHES
395 MS 133-A21:2010 PAINTS AND VARNISHES - DETERMINATION OF PIGMENT CONTENT - PART A21: CENTRIFUGE METHOD (ISO 14680-1:2000, IDT) 87.060.10 IDENTICAL TO INTERNATIONAL STANDARD ISO 14680-1:2000 PAINTS AND VARNISHES
396 MS 133-A22:2010 PAINTS AND VARNISHES - DETERMINATION OF PIGMENT CONTENT - PART A22: ASHING METHOD (ISO 14680-2:2000, IDT) 87.060.10 IDENTICAL TO INTERNATIONAL STANDARD ISO 14680-2:2000 PAINTS AND VARNISHES
397 MS 133-A23:2010 PAINTS AND VARNISHES - DETERMINATION OF PIGMENT CONTENT - PART A23: FILTRATION METHOD (ISO 14680-3:2000, IDT) 87.060.10 IDENTICAL TO INTERNATIONAL STANDARD ISO 14680-3:2000 PAINTS AND VARNISHES
398 MS 133-B12:2010 PAINTS AND VARNISHES - DETERMINATION OF TOTAL MERCURY - PART B12: FLAMELESS ATOMIC ABSORPTION SPECTROMETRIC METHOD (ISO 7252:1984, IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 7252:1984 PAINTS AND VARNISHES
399 MS 133-B13:2010 PAINTS AND VARNISHES - PART B13: PREPARATION OF ACID EXTRACTS FROM PAINTS IN LIQUID OR POWDER FORM (ISO 6713:1984, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 6713:1984 PAINTS AND VARNISHES
400 MS 133-B2:2010 PAINTS AND VARNISHES - PART B2: DETERMINATION OF NON-VOLATILE-MATTER CONTENT (SECOND REVISION) (ISO 3251:2008, IDT) 83.080.01, 87.040, 87.060.20 IDENTICAL TO INTERNATIONAL STANDARD ISO 3251:2008 PAINTS AND VARNISHES
401 MS 133-C3:2010 PAINTS AND VARNISHES - DRYING TESTS - PART C3: DETERMINATION OF THROUGH-DRY STATE AND THROUGH-DRY TIME (SECOND REVISION) (ISO 9117-1:2009, IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 9117-1:2009 PAINTS AND VARNISHES
402 MS 133-C5:2010 PAINTS AND VARNISHES - PART C5: DETERMINATION OF FILM THICKNESS (SECOND REVISION)(ISO 2808:2007, IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 2808:2007 PAINTS AND VARNISHES
403 MS 133-C6:2010 PAINTS AND VARNISHES - PART C6: DETERMINATION OF FINENESS OF GRIND (SECOND REVISION) (ISO 1524:2000, IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 1524:2000 PAINTS AND VARNISHES
404 MS 133-C8:2010 PAINTS AND VARNISHES - PART C8: PRINT-FREE TEST (ISO 3678:1976, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 3678:1976 PAINTS AND VARNISHES
405 MS 133-D12:2010 PAINTS AND VARNISHES - PART D12: DETERMINATION OF REFLECTION HAZE ON PAINT FILMS AT 20 DEGREES (ISO 13803:2000, IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 13803:2000 PAINTS AND VARNISHES
406 MS 133-D6:2010 PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART D6: DETERMINATION OF CONTRAST RATIO OF LIGHT-COLOURED PAINTS AT A FIXED SPREADING RATE (FIRST REVISION) (ISO 6504-3:2006, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 6504-3:2006 PAINTS AND VARNISHES
407 MS 133-E11:2010 PAINTS AND VARNISHES - PART E11: BEND TEST (CONICAL MANDREL) (FIRST REVISION) (ISO 6860:2006, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 6860:2006 PAINTS AND VARNISHES
408 MS 133-E20:2010 PAINTS AND VARNISHES - RAPID-DEFORMATION (IMPACT RESISTANCE) TESTS - PART E20: FALLING-WEIGHT TEST, SMALL-AREA INDENTER (ISO 6272-2:2002, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 6272-2:2002 PAINTS AND VARNISHES
409 MS 133-E3:2010 PAINTS AND VARNISHES - RAPID-DEFORMATION (IMPACT RESISTANCE) TESTS - PART E3: FALLING-WEIGHT TEST, LARGE-AREA INDENTER (SECOND REVISION) (ISO 6272-1:2002, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 6272-1:2002 PAINTS AND VARNISHES
410 MS 133-E4:2010 PAINTS AND VARNISHES - PART E4: CUPPING TEST (SECOND REVISION) (ISO 1520:2006, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 1520:2006 PAINTS AND VARNISHES
411 MS 133-E5:2010 PAINTS AND VARNISHES - PART E5: PENDULUM DAMPING TEST (SECOND REVISION) (ISO 1522:2006, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 1522:2006 PAINTS AND VARNISHES
412 MS 133-E6:2010 PAINTS AND VARNISHES - PART E6: CROSS-CUT TEST (SECOND REVISION) (ISO 2409:2007, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 2409:2007 PAINTS AND VARNISHES
413 MS 133-E9:2010 PAINTS AND VARNISHES - PART E9: BUCHHOLZ INDENTATION TEST (FIRST REVISION) (ISO 2815:2003, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 2815:2003 PAINTS AND VARNISHES
414 MS 904:2010 PAINTS AND VARNISHES - TERMS AND DEFINITIONS (FIRST REVISION) (ISO 4618:2006, IDT) 01.040.87, 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 4618:2006 PAINTS AND VARNISHES
415 MS ISO 14487:2010 PULPS - STANDARD WATER FOR PHYSICAL TESTING (ISO 14487:1997, IDT) 85.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 14487:1997 PULP, PAPER AND BOARD
416 MS ISO 15754:2010 PAPER AND BOARD - DETERMINATION OF z-DIRECTIONAL TENSILE STRENGTH (ISO 15754:2009, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 15754:2009 PULP, PAPER AND BOARD
417 MS ISO 1924-2:2010 PAPER AND BOARD - DETERMINATION OF TENSILE PROPERTIES - PART 2: CONSTANT RATE OF ELONGATION METHOD (20 mm/min) (FIRST REVISION) (ISO 1924-2:2008, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 1924-2:2008 PULP, PAPER AND BOARD
418 MS ISO 2470-1:2010 PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE BLUE REFLECTANCE FACTOR - PART 1: INDOOR DAYLIGHT CONDITIONS (ISO BRIGHTNESS) (FIRST REVISION) (ISO 2470-1:2009, IDT) 85.040, 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 2470-1:2009 PULP, PAPER AND BOARD
419 MS ISO 2471:2010 PAPER AND BOARD - DETERMINATION OF OPACITY (PAPER BACKING) - DIFFUSE REFLECTANCE METHOD (FIRST REVISION) (ISO 2471:2008, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 2471:2008 PULP, PAPER AND BOARD
420 MS ISO 287:2010 PAPER AND BOARD - DETERMINATION OF MOISTURE CONTENT OF A LOT - OVEN DRYING METHOD (FIRST REVISION) (ISO 287:2009, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 287:2009 PULP, PAPER AND BOARD
421 MS ISO 3689:2010 PAPER AND BOARD - DETERMINATION OF BURSTING STRENGTH AFTER IMMERSION IN WATER (ISO 3689:1983, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 3689:1983 PULP, PAPER AND BOARD
422 MS ISO 5269-2:2010 PULPS - PREPARATION OF LABORATORY SHEETS FOR PHYSICAL TESTING - PART 2: RAPID-KOTHEN METHOD (ISO 5269-2:2004, IDT) 85.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 5269-2:2004 PULP, PAPER AND BOARD
423 MS ISO 5269-3:2010 PULPS - PREPARATION OF LABORATORY SHEETS FOR PHYSICAL TESTING - PART 3: CONVENTIONAL AND RAPID-KOTHEN SHEET FORMERS USING A CLOSED WATER SYSTEM (ISO 5269-3:2008, IDT) 85.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 5269-3:2008 PULP, PAPER AND BOARD
424 MS ISO 5627:2010 PAPER AND BOARD - DETERMINATION OF SMOOTHNESS (BEKK METHOD) (ISO 5627:1995, Cor. 1:2002, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 5627:2002 PULP, PAPER AND BOARD
425 MS ISO 5630-6:2010 PAPER AND BOARD - ACCELERATED AGEING - PART 6: EXPOSURE TO ATMOSPHERIC POLLUTION (NITROGEN DIOXIDE) (ISO 5630-6:2009, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 5630-6:2009 PULP, PAPER AND BOARD
426 MS ISO 5631-1:2010 PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFELCTANCE - PART 1: INDOOR DAYLIGHT CONDITIONS (C/2 DEGREES) (FIRST REVISION) (ISO 5631-1:2009, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 5631-1:2009 PULP, PAPER AND BOARD
427 MS ISO 9416:2010 PAPER - DETERMINATION OF LIGHT SCATTERING AND ABSORPTION COEFFICIENTS (USING KUBELKA-MUNK THEORY) (ISO 9416:2009, IDT) 85.040, 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 9416:2009 PULP, PAPER AND BOARD
428 MS ISO 9895:2010 PAPER AND BOARD - COMPRESSIVE STRENGTH - SHORT-SPAN TEST (ISO 9895:2008, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 9895:2008 PULP, PAPER AND BOARD
429 MS 645:2010 ETHANOL FOR INDUSTRIAL USE - SPECIFICATION (FIRST REVISION) 71.080.60 INDIGENOUS - GENERAL PURPOSE CHEMICALS
430 MS 852:2010 PHOSPHORIC ACID - TECHNICAL GRADE - SPECIFICATION (FIRST REVISION) 71.060.30 INDIGENOUS - GENERAL PURPOSE CHEMICALS
431 MS 1256:2010 HOUSEHOLD PESTICIDE PRODUCTS - RAT BAIT - SPECIFICATION (FIRST REVISION) 65.100.10, 71.100.99 INDIGENOUS - HOUSEHOLD PESTICIDES
432 MS 1257:2010 HOUSEHOLD INSECTICIDE PRODUCTS - AEROSOL AGAINST FLYING INSECTS - SPECIFICATION (FIRST REVISION) 65.100.10, 71.100.99 INDIGENOUS - HOUSEHOLD PESTICIDES
433 MS 1326-2:2010 HOUSEHOLD INSECTICIDE PRODUCTS - CONTAINERISED COCKROACH BAIT - SPECIFICATION (FIRST REVISION) 65.100.10, 71.100.99 INDIGENOUS - HOUSEHOLD PESTICIDES
434 MS 850:2010 LIMESTONE, QUICKLIME AND HYDRATED LIME - METHODS FOR CHEMICAL ANALYSIS (SECOND REVISION) 71.040.40 INDIGENOUS - LIME & LIME PRODUCTS
435 MS 2320:2010 DRINKING WATER - QUALITY REQUIREMENTS 13.060.20 INDIGENOUS - WATER QUALITY
436 MS 133-A9:2010 PAINTS AND VARNISHES - PART A9: CONSISTENCY OF PAINTS MEASURING KREBS UNIT (KU) VISCOSITY USING A STORMER-TYPE VISCOMETER (SECOND REVISION) 87.040 ADAPTED FROM INTERNATIONAL STANDARD ASTM D 562-01 (2005) PAINTS AND VARNISHES
437 MS 18:2010 TOILET TISSUE PAPER - SPECIFICATION (FIRST REVISION) 85.080 INDIGENOUS - PULP, PAPER AND BOARD
438 MS 2362:2010 RECOVERED PAPER - GRADE DESCRIPTION AND MOISTURE INSPECTION PROCEDURES 85.060 INDIGENOUS - PULP, PAPER AND BOARD
439 MS ISO 15732:2011 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE BY SINGLE EDGE PRECRACKED BEAM (SEPB) METHOD (ISO 15732:2003, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 15732:2003 FINE CERAMICS
440 MS ISO 27447:2011 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR ANTIBACTERIAL ACTIVITY OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS (ISO 27447:2009, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 27447:2009 FINE CERAMICS
441 MS ISO 9308-1:2011 WATER QUALITY - DETECTION AND ENUMERATION OF ESCHERICHIA COLI AND COLIFORM BACTERIA - PART 1: MEMBRANE FILTRATION METHOD (ISO 9308-1:2000, IDT) 07.100.20 IDENTICAL TO INTERNATIONAL STANDARD ISO 9308-1:2000 MICROBIOLOGICAL & BIOLOGICAL METHODS (WATER QUALITY)
442 MS 2405:2011 WATER QUALITY - DETERMINATION OF THE CHEMICAL OXYGEN DEMAND (ISO 6060:1989, MOD) 13.060.50 MODIFIED TO INTERNATIONAL STANDARD ISO 6060:1989 PHYSICAL, CHEMICAL, BIOCHEMICAL TEST METHODS (WATER QUALITY)
443 MS 133: PART A13:1994
(CONFIRMED:2011)
METHODS OF TEST FOR PAINTS AND VARNISHES : PART A13 : DETERMINATION OF FLOW TIME BY USE OF ISO 2431 FLOW CUPS 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 2431-1993 PAINTS AND VARNISHES
444 MS 133: PART B4:1997
(CONFIRMED:2011)
METHODS OF TEST FOR PAINTS AND VARNISHES: PART B4: DETERMINATION OF TOTAL LEAD BY FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FIRST REVISION) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 6503:1984 PAINTS AND VARNISHES
445 MS 133: PART B5:1997
(CONFIRMED:2011)
METHOD OF TEST FOR PAINTS AND VERNISHES: PART B5: DETERMINATION OF SOLUBLE LEAD BY ATOMIC ABSORPTION SPECTROMETRIC METHOD AND DITHIZONE SPECTROPHOTOMETRIC METHOD 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 3856-1:1984 PAINTS AND VARNISHES
446 MS 133: PART B10:1999
(CONFIRMED:2011)
METHODS OF TEST FOR PAINTS AND VARNISHES: PART B10: DETERMINATION OF SOLUBLE TOTAL CHROMIUM CONTENT OF THE LIQUID PORTION OF THE PAINT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 3856/6:1984 PAINTS AND VARNISHES
447 MS 133: PART B11:1999
(CONFIRMED:2011)
METHODS OF TEST FOR PAINTS AND VARNISHES: PART B11: DETERMINATION OF SOLUBLE MERCURY CONTENT OF THE PIGMENT PORTION OF THE PAINT AND OF THE LIQUID PORTION OF WATER - DILUTABLE PAINTS - FLAMELESS ATOMIC ABSORPTION SPECTROMERTIC METHOD (ISO 3856/7: 1984, IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 3856/7:1984 PAINTS AND VARNISHES
448 MS 133: PART B6:1999
(CONFIRMED:2011)
METHODS OF TEST FOR PAINTS AND VARNISHES: PART B6: DETERMINATION OF SOLUBLE ANTIMONY CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD AND RHODAMINE B SPECTROPHOTOMETRIC METHOD (ISO 3856/2:1984, IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 3856/2:1984 PAINTS AND VARNISHES
449 MS 133: PART B7:1999
(CONFIRMED:2011)
METHODS OF TEST FOR PAINTS AND VARNISHES: PART B7: DETERMINATION OF SOLUBLE BARIUM CONTENT - FLAME ATOMIC EMISSION SPECTROMETRIC METHOD (ISO 3856/3:1984, IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 3856/3:1984 PAINTS AND VARNISHES
450 MS 133: PART B8:1999
(CONFIRMED:2011)
METHODS OF TEST FOR PAINTS AND VARNISHES: PART B8: DETERMINATION OF SOLUBLE CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD AND POLAGRAPHIC METHOD (ISO 3856/4: 1984, IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 3856/4:1984 PAINTS AND VARNISHES
451 MS 133: PART B9:1999
(CONFIRMED:2011)
METHODS OF TEST FOR PAINTS AND VARNISHES: PART B9: DETERMINATION OF SOLUBLE HEXAVALENT CHROMIUM CONTENT OF THE PIGMENT PORTION OF THE LIQUID PAINT OR THE PAINT IN POWDER FORM - DIPHENYLCARBAZIDE SPECTROPHOTOMETRIC METHOD  (ISO 3856/5:1984, IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 3856/5:1984 PAINTS AND VARNISHES
452 MS 133: PART E14:2002
(CONFIRMED:2011)
METHODS OF TEST FOR PAINTS AND VARNISHES : PART E14 : DETERMINATION OF RESISTANCE TO ABRASION - ROTATING ABRASIVE-PAPER-COVERED WHEEL METHOD (ISO 7784-1:1997, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 7784-1:1997 PAINTS AND VARNISHES
453 MS 133: PART A14:1996 (CONFIRMED:2011) METHODS OF TEST FOR PAINTS AND VARNISHES AND THEIR RAW MATERIALS : PART A14 : TEMPERATURES AND HUMIDITIES FOR CONDITIONING AND TESTING 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 3270:1984 PAINTS AND VARNISHES
454 MS 133: PART D10:1999 (CONFIRMED:2011) METHODS OF TEST FOR PAINTS AND VARNISHES : PART D10: COLORIMETRY - COLOUR MEASUREMENT (ISO 7724/2:1984, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 7724/2:1984 PAINTS AND VARNISHES
455 MS 133: PART D11:1999 (CONFIRMED:2011) METHODS OF TEST FOR PAINTS AND VARNISHES : PART D11 : COLORIMETRY - CALCULATION OF COLOUR DIFFERENCES (ISO 7724/3 : 1984, IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 7724/3 : 1984 PAINTS AND VARNISHES
456 MS 133 : PART D4 : 1998 (CONFIRMED:2011) METHODS OF TEST FOR PAINTS AND VARNISHES : PART D4 : COMPARISON OF CONTRAST RATIO (HIDING POWER) OF PAINTS OF THE SAME TYPE AND COLOUR (FIRST REVISION) [ISO 2814 : 1973, MOD] 83.040 MODIFIED TO INTERNATIONAL STANDARD ISO 2814 : 1973 PAINTS AND VARNISHES
457 MS 133 : PART D1 : 1998 (CONFIRMED:2011) METHODS OF TEST FOR PAINTS AND VARNISHES : PART D1 : VISUAL COMPARISON OF THE COLOUR OF PAINTS (FIRST REVISION) (ISO 3668 : 1998, IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 3668 : 1998 PAINTS AND VARNISHES
458 MS 1398-1:2011 HOUSEHOLD INSECTIDE PRODUCTS - MOSQUITO VAPOURISING LIQUID - SPECIFICATION (SECOND REVISION) 65.100.10, 71.100.99 INDIGENOUS - HOUSEHOLD PESTICIDES
459 MS 651:2011 LIMESTONE FOR MAKING COLOURLESS GLASSES - SPECIFICATION (FIRST REVISION) 71.100.99 INDIGENOUS - LIME & LIME PRODUCTS
460 MS 1880-3:2011 SOIL QUALITY - VOCABULARY: PART 3: TERMS AND DEFINITIONS RELATING TO RISK MANAGEMENT 01.020 INDIGENOUS ISO 11074:2005 SOIL QUALITY
461 MS 133: PART C1:1996 (CONFIRMED:2011) METHODS OF TEST FOR PAINTS AND VARNISHES PART C1: DETERMINATION OF WET EDGE TIME (FIRST REVISION) 87.040 INDIGENOUS BS 3900: Part C1:1965 PAINTS AND VARNISHES
462 MS 133: PART D 9:1999 (CONFIRMED:2011) METHODS OF TEST FOR PAINTS AND VARNISHES : PART D9: COLORIMETRY - PRINCIPLES 87.040 INDIGENOUS ISO 7724/1:1984 PAINTS AND VARNISHES
463 MS 133: PART G6:1978 (CONFIRMED:2011) METHODS OF TEST FOR PAINTS PART G6: RESISTANCE TO FUNGAL GROWTH 87.040 INDIGENOUS - PAINTS AND VARNISHES
464 MS ISO 10677:2012 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - ULTRAVIOLET LIGHT SOURCE FOR TESTING SEMICONDUCTING PHOTOCATALYTIC MATERIALS (ISO 10677:2011, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 10677:2011 FINE CERAMICS
465 MS ISO 13124:2012 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR INTERFACIAL BOND STRENGTH OF CERAMIC MATERIALS (ISO 13124:2011, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 13124:2011 FINE CERAMICS
466 MS ISO 22197-2:2012 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - PART 2: REMOVAL OF ACETALDEHYDE (ISO 22197-2:2011, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 22197-2:2011 FINE CERAMICS
467 MS ISO 22197-3:2012 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - PART 3: REMOVAL OF TOLUENE (ISO 22197-3:2011, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 22197-3:2011 FINE CERAMICS
468 MS ISO 28703:2012 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR THERMAL-SHOCK RESISTANCE OF POROUS CERAMICS (ISO 28703:2011, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 28703:2011 FINE CERAMICS
469 MS ISO 28704:2012 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR CYCLIC BENDING FATIGUE OF POROUS CERAMICS AT ROOM TEMPERATURE (ISO 28704:2011, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 28704:2011 FINE CERAMICS
470 MS ISO/TS 10867:2012 NANOTECHNOLOGIES – CHARACTERIZATION OF SINGLE-WALL CARBON NANOTUBES USING NEAR INFRARED PHOTOLUMINESCENCE SPECTROSCOPY (ISO/TS 10867:2010, IDT) 07.030 IDENTICAL TO INTERNATIONAL STANDARD ISO/TS 10867:2010 NANOTECHNOLOGIES
471 MS ISO/TS 11251:2012 NANOTECHNOLOGIES – CHARACTERIZATION OF VOLATILE COMPONENTS IN SINGLE-WALL CARBON NANOTUBE SAMPLES USING EVOLVED GAS ANALYSIS/GAS CHROMATOGRAPHY-MASS SPECTROMETRY (ISO/TS 11251:2010, IDT) 07.030 IDENTICAL TO INTERNATIONAL STANDARD ISO/TS 11251:2010 NANOTECHNOLOGIES
472 MS ISO 8124-3:2012  SAFETY OF TOYS - PART 3: MIGRATION OF CERTAIN ELEMENTS (FIRST REVISION) (ISO 8124-3:2010, IDT) 97.200.50 IDENTICAL TO INTERNATIONAL STANDARD ISO 8124-3:2010 SAFETY OF TOYS
473 MS ISO 8124-4:2012 SAFETY OF TOYS - PART 4:SWINGS, SLIDES AND SIMILAR ACTIVITY TOYS FOR INDOOR AND OUTDOOR FAMILY DOMESTIC USE (ISO 8124-4:2010,IDT) 97.200.50 IDENTICAL TO INTERNATIONAL STANDARD ISO 8124-4:2010 SAFETY OF TOYS
474 MS 133-C2:2012 PAINTS AND VARNISHES - DRYING TESTS - PART C2: SURFACE-DRYING TEST USING BALLOTINI (SECOND REVISION) (ISO 9117-3:2010, IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 9117-3:2010 PAINTS AND VARNISHES
475 MS 133-C9:2012 PAINTS AND VARNISHES - DRYING TESTS - PART C9: PRESSURE TEST FOR STACKABILITY (ISO 9117-2:2010, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 9117-2:2010 PAINTS AND VARNISHES
476 MS 133-E10:2012  PAINTS AND VARNISHES - PART E10: PULL-OFF TEST FOR ADHESION (FIRST REVISION) (ISO 4624:2002, MOD) 87.040 MODIFIED TO INTERNATIONAL STANDARD ISO 4624:2002 PAINTS AND VARNISHES
477 MS 133-K1:2012  BINDERS FOR PAINTS AND VARNISHES - ALKYD RESINS - PART K1: GENERAL METHODS OF TEST (ISO 6744-1:1999, IDT) 87.060.20 IDENTICAL TO INTERNATIONAL STANDARD ISO 6744-1:1999 PAINTS AND VARNISHES
478 MS 133-K10:2012  CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART K10: VISUAL METHOD (ISO 4630-1:2004, IDT) 87.060.20 IDENTICAL TO INTERNATIONAL STANDARD ISO 4630-1:2004 PAINTS AND VARNISHES
479 MS 133-K11:2012  CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART K11: SPECTROPHOTOMETRIC METHOD (ISO 4630-2:2004, IDT) 87.060.20 IDENTICAL TO INTERNATIONAL STANDARD ISO 4630-2:2004 PAINTS AND VARNISHES
480 MS 133-K12:2012  CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE PLATINUM-COBALT SCALE - PART K12: VISUAL METHOD (ISO 6271-1:2004, IDT) 87.060.20 IDENTICAL TO INTERNATIONAL STANDARD ISO 6271-1:2004 PAINTS AND VARNISHES
481 MS 133-K13:2012  CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE PLATINUM-COBALT SCALE - PART K13: SPECTROPHOTOMETRIC METHOD (ISO 6271-2:2004, IDT) 87.060.20 IDENTICAL TO INTERNATIONAL STANDARD ISO 6271-2:2004 PAINTS AND VARNISHES
482 MS 133-K2:2012  BINDERS FOR PAINTS AND VARNISHES - ALKYD RESINS - PART K2: DETERMINATION OF PHTHALIC ANHYDRIDE CONTENT (ISO 6744-2:1999, IDT) 87.060.20 IDENTICAL TO INTERNATIONAL STANDARD ISO 6744-2:1999 PAINTS AND VARNISHES
483 MS 133-K3:2012  BINDERS FOR PAINTS AND VARNISHES - ALKYD RESINS - PART K3: DETERMINATION OF UNSAPONIFIABLE MATTER CONTENT (ISO 6744-3:1999, IDT) 87.060.20 IDENTICAL TO INTERNATIONAL STANDARD ISO 6744-3:1999 PAINTS AND VARNISHES
484 MS 133-K4:2012  BINDERS FOR PAINTS AND VARNISHES - ALKYD RESINS - PART K4: DETERMINATION OF FATTY ACID CONTENT (ISO 6744-4:1999, IDT) 87.060.20 IDENTICAL TO INTERNATIONAL STANDARD ISO 6744-4:1999 PAINTS AND VARNISHES
485 MS 133-K5:2012  BINDERS FOR PAINTS AND VARNISHES - EPOXY RESINS - PART K5: GENERAL METHODS OF TEST (ISO 7142:2007, IDT) 87.060.20 IDENTICAL TO INTERNATIONAL STANDARD ISO 7142:2007 PAINTS AND VARNISHES
486 MS 133-K6:2012  BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF SAPONIFICATION VALUE - PART K6: TITRIMETRIC METHOD (ISO 3681:1996, IDT) 87.060.20 IDENTICAL TO INTERNATIONAL STANDARD ISO 3681:1996 PAINTS AND VARNISHES
487 MS 133-K7:2012  BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF SOFTENING POINT - PART K7: RING-AND-BALL METHOD (ISO 4625-1:2004, IDT) 87.060.20 IDENTICAL TO INTERNATIONAL STANDARD ISO 4625-1:2004 PAINTS AND VARNISHES
488 MS 133-K8:2012  BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF SOFTENING POINT - PART K8: CUP-AND-BALL METHOD (ISO 4625-2:2004, IDT) 87.060.20 IDENTICAL TO INTERNATIONAL STANDARD ISO 4625-2:2004 PAINTS AND VARNISHES
489 MS 133-K9:2012  BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF HYDROXYL VALUE - PART K9: TITRIMETRIC METHOD (ISO 4629:1996, IDT) 87.060.20 IDENTICAL TO INTERNATIONAL STANDARD ISO 4629:1996 PAINTS AND VARNISHES
490 MS ISO 11093-5:2012 PAPER AND BOARD - TESTING OF CORES - PART 5: DETERMINATION OF CHARACTERISTICS OF CONCENTRIC ROTATION (First revision) (ISO 11093-5:2009, COR. 1:2010, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 11093-5:1994 PULP, PAPER AND BOARD
491 MS ISO 7263:2012  CORRUGATING MEDIUM - DETERMINATION OF THE FLAT CRUSH RESISTANCE AFTER LABORATORY FLUTING (FIRST REVISION) (ISO 7263:2011, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 7263:2011 PULP, PAPER AND BOARD
492 MS ISO 12192:2012  PAPER AND BOARD - DETERMINATION OF COMPRESSIVE STRENGTH - RING CRUSH METHOD (FIRST REVISION) (ISO 12192:2011, IDT). 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 12192:2011 PULP, PAPER AND BOARD
493 MS ISO 15320:2012  PULP, PAPER AND BOARD — DETERMINATION OF PENTACHLOROPHENOL IN AN AQUEOUS EXTRACT (ISO 15320:2011, IDT) 85.060, 85.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 15320:2011 PULP, PAPER AND BOARD
494 MS ISO 2493-1:2012  PAPER AND BOARD - DETERMINATION OF BENDING RESISTANCE - PART 1: CONSTANT RATE OF DEFLECTION (SECOND REVISION) (ISO 2493-1:2010, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 2493-1:2010 PULP, PAPER AND BOARD
495 MS ISO 3034:2012  CORRUGATED FIBREBOARD - DETERMINATION OF SINGLE SHEET THICKNESS (FIRST REVISION) (ISO 3034:2011, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 3034:2011 PULP, PAPER AND BOARD
496 MS ISO 776:2012  PULPS — DETERMINATION OF ACID-INSOLUBLE ASH (FIRST REVISION) (ISO 776:2011, IDT) 85.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 776:2011 PULP, PAPER AND BOARD
497 MS ISO 5351:2012 PULPS- DETERMINATION OF LIMITIMG VISCOSITY NUMBER IN CUPRI-ETHYLENEDIAMINE(CED) SOLUTION (ISO 5351:2010, IDT) 85.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 5351:2010 PULP, PAPER AND BOARD
498 MS 1517:2012  ORGANIC FERTILIZERS - SPECIFICATION (FIRST REVISION) 65.080 INDIGENOUS - FERTILIZERS
499 MS 880-9:2012  METHODS OF TEST FOR PHOSPHORIC ACID - PART 9 : DETERMINATION OF IMPURITIES - LIMIT TEST 71.060.30 INDIGENOUS - GENERAL PURPOSE CHEMICALS
500 MS 1044:2012 HOUSEHOLD INSECTICIDE PRODUCTS - MOSQUITO VAPOURISING MAT - SPECIFICATION (SECOND REVISION) 65.100.10, 71.100.99 INDIGENOUS - HOUSEHOLD PESTICIDES
501 MS 1158:2012 CRAYONS - SPECIFICATION (FIRST REVISION) 97.200.50 INDIGENOUS - SAFETY OF TOYS
502 MS 1162:2012 CRAYONS - TEST METHODS (FIRST REVISION) 97.200.50 INDIGENOUS - SAFETY OF TOYS
503 MS 2457:2012  SOIL QUALITY - CHEMICAL ANALYSIS - DETERMINATION OF PH (WATER OR KCl) (FIRST REVISION) 13.080 INDIGENOUS - SOIL QUALITY
504 MS 2458:2012  SOIL QUALITY - CHEMICAL ANALYSIS - DETERMINATION OF SPECIFIC ELECTRICAL CONDUCTIVITY (FIRST REVISION) 13.080 INDIGENOUS - SOIL QUALITY
505 MS 2459:2012  SOIL QUALITY - CHEMICAL ANALYSIS - DETERMINATION OF ORGANIC CARBON CONTENT (WALKLEY AND BLACK COLOURIMETRIC METHOD) (FIRST REVISION) 13.080 INDIGENOUS - SOIL QUALITY
506 MS 2469:2012  SOIL QUALITY - CHEMICAL ANALYSIS - DETERMINATION OF ORGANIC MATTER CONTENT (WALKLEY AND BLACK TITRATION METHOD) (FIRST REVISION) 13.080 INDIGENOUS - SOIL QUALITY
507 MS 479:2012, ERR. 1:2013 THE SAFE HANDLING OF AGRICULTURAL PESTICIDES - CODE OF RECOMMENDED PRACTICE (FIRST REVISION) 65.1 INDIGENOUS - PESTICIDES AND AGROCHEMICALS
508 MS 1288:2012  PHOTOCOPY PAPER - SPECIFICATION (FIRST REVISION) 85.080 INDIGENOUS - PULP, PAPER AND BOARD
509 MS 2532:2013 FORTIFIED ORGANIC FERTILIZERS - SPECIFICATION 65.080 INDIGENOUS - FERTILIZERS
510 MS 2546:2013 METHYL BROMIDE FUMIGATION - REQUIREMENTS 65.100 INDIGENOUS - PESTICIDES AND AGROCHEMICALS
511 MS 171:2013 LIQUID CHLORINE USED FOR POTABLE WATER SUPPLY - SPECIFICATION (SECOND REVISION) 71.100.80 INDIGENOUS - WATER TREATMENT CHEMICALS
512 MS ISO 14703:2009 (CONFIRMED 2014) FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - SAMPLE PREPARATION FOR THE DETERMINATION OF PARTICLE SIZE DISTRIBUTION OF CERAMIC POWDERS (FIRST REVISION) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 14703:2008 FINE CERAMICS
513 MS ISO 15165:2005 (CONFIRMED 2014) FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - CLASSIFICATION SYSTEM (ISO 15165:2001, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 15165:2001 FINE CERAMICS
514 MS ISO 15490:2008 (CONFIRMED 2014) FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR TENSILE STRENGTH OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE
(FIRST REVISION) (ISO 15490:2008, IDT)
81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 15490:2008 FINE CERAMICS
515 MS ISO 18755:2006 (CONFIRMED 2014) FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF THERMAL DIFFUSIVITY OF MONOLITHIC CERAMICS BY LASER FLASH METHOD (ISO 18755:2005, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 18755:2005 FINE CERAMICS
516 MS ISO 20502:2009 (CONFIRMED 2014) FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF ADHESION OF CERAMIC COATINGS BY SCRATCH TESTING (FIRST REVISION) (ISO 20502:2005/Cor 1:2009, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 20502:2005/Cor 1:2009 FINE CERAMICS
517 MS ISO 20504:2006 (CONFIRMED 2014) FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR COMPRESSIVE BEHAVIOUR OF CONTINUOUS FIBRE-REINFORCED COMPOSITES AT ROOM TEMPERATURE (ISO 20504:2006, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 20504:2006 FINE CERAMICS
518 MS ISO 22214:2007 (CONFIRMED 2014) FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR CYCLIC BENDING FATIGUE OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE (ISO 22214:2006, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 22214:2006 FINE CERAMICS
519 MS ISO 22215:2006 (CONFIRMED 2014) FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR TENSILE CREEP OF MONOLITHIC CERAMICS (ISO 22215:2006, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 22215:2006 FINE CERAMICS
520 MS ISO 23145-1:2008 (CONFIRMED 2014) FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF BULK DENSITY OF CERAMIC POWDERS - PART 1: TAP DENSITY (ISO 23145-1:2007, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 23145-1:2007 FINE CERAMICS
521 MS ISO 24235:2008 (CONFIRMED 2014) FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF PARTICLE SIZE DISTRIBUTION OF CERAMIC POWDERS BY LASER DIFFRACTION METHOD (ISO 24235:2007, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 24235:2007 FINE CERAMICS
522 MS ISO 26424:2009 (CONFIRMED 2014) FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF THE ABRASION RESISTANCE OF COATINGS BY MICRO-SCALE ABRASION TEST (ISO 26424:2008, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 26424:2008 FINE CERAMICS
523 MS ISO 26443:2009 (CONFIRMED 2014) FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - ROCKWELL INDENTATION TEST FOR EVALUATION OF ADHESION OF CERAMIC COATINGS (ISO 26443:2008, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 26443:2008 FINE CERAMICS
524 MS ISO 3696:2007 (CONFIRMED 2014) WATER FOR ANALYTICAL LABORATORY USE - SPECIFICATION AND TEST METHODS (ISO 3696:1987, IDT) 13.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 3696:1987 GENERAL PURPOSE CHEMICALS
525 MS ISO 6206:2003 (CONFIRMED 2014) CHEMICAL PRODUCTS FOR INDUSTRIAL USE - SAMPLING - VOCABULARY (ISO 6206:1979, IDT) 71.040.40 IDENTICAL TO INTERNATIONAL STANDARD ISO 6206:1979 GENERAL PURPOSE CHEMICALS
526 MS ISO 6353-1:2003 (CONFIRMED 2014) REAGENTS FOR CHEMICAL ANALYSIS - PART 1: GENERAL TEST METHODS (ISO 6353-1:1982, IDT) 71.040.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 6353-1:1982 GENERAL PURPOSE CHEMICALS
527 MS ISO 6353-2:2003 (CONFIRMED 2014) REAGENTS FOR CHEMICAL ANALYSIS - PART 2: SPECIFICATIONS - FIRST SERIES (ISO 6353-2:1983, ADD. 2:1986, IDT) 71.040.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 6353-2:1983, ADD. 2:1986 GENERAL PURPOSE CHEMICALS
528 MS ISO 1066:2006 (CONFIRMED 2014) ANALYSIS OF SOAPS - DETERMINATION OF GLYCEROL CONTENT - TITRIMETRIC METHOD (ISO 1066:1975, IDT) 71.100.40 IDENTICAL TO INTERNATIONAL STANDARD ISO 1066:1975 SOAPS AND DETERGENTS
529 MS ISO 2271:2003 (CONFIRMED 2014) SURFACE ACTIVE AGENTS - DETERGENTS - DETERMINATION OF ANIONIC-ACTIVE MATTER BY MANUAL OR MECHANICAL DIRECT TWOPHASE TITRATION PROCEDURE (FIRST REVISION) (ISO 2271:1989, IDT) 71.100.40 IDENTICAL TO INTERNATIONAL STANDARD ISO 2271:1989 SOAPS AND DETERGENTS
530 MS ISO 456:2005 (CONFIRMED 2014) SURFACE ACTIVE AGENTS - ANALYSIS OF SOAPS - DETERMINATION OF FREE CAUSTIC ALKALI (ISO 456:1973, IDT) 71.100.40 IDENTICAL TO INTERNATIONAL STANDARD ISO 456:1973 SOAPS AND DETERGENTS
531 MS ISO 607:2004 (CONFIRMED 2014) SURFACE ACTIVE AGENTS AND DETERGENTS - METHOD OF SAMPLE DIVISION (ISO 607:1980, IDT) 71.100.40 IDENTICAL TO INTERNATIONAL STANDARD ISO 607:1980 SOAPS AND DETERGENTS
532 MS ISO 672:2006 (CONFIRMED 2014) SOAPS - DETERMINATION OF MOISTURE AND VOLATILE MATTER CONTENT - OVEN METHOD (ISO 672:1978, IDT) 71.100.40 IDENTICAL TO INTERNATIONAL STANDARD ISO 672:1978 SOAPS AND DETERGENTS
533 MS ISO 673:2004 (CONFIRMED 2014) SOAPS - DETERMINATION OF CONTENT OF ETHANOL-INSOLUBLE MATTER (ISO 673:1981, IDT) 71.100.40 IDENTICAL TO INTERNATIONAL STANDARD ISO 673:1981 SOAPS AND DETERGENTS
534 MS ISO 685:2006 (CONFIRMED 2014) ANALYSIS OF SOAPS - DETERMINATION OF TOTAL ALKALI CONTENT AND TOTAL FATTY MATTER CONTENT (ISO 685:1975, IDT) 71.100.40 IDENTICAL TO INTERNATIONAL STANDARD ISO 685:1975 SOAPS AND DETERGENTS
535 MS ISO 862:2005 (CONFIRMED 2014) SURFACE ACTIVE AGENTS - VOCABULARY (ISO 862:1984 AND ITS TECHNICAL CORRIGENDUM 1:1993, IDT) 71.100.40 IDENTICAL TO INTERNATIONAL STANDARD ISO 862:1984 AND ITS TECHNICAL CORRIGENDUM 1:1993 SOAPS AND DETERGENTS
536 MS ISO 13878:2014 SOIL QUALITY - DETERMINATION OF TOTAL NITROGEN CONTENT BY DRY COMBUSTION ("ELEMENTAL ANALYSIS") (ISO 13878:1998, IDT) 13.080.10 IDENTICAL TO INTERNATIONAL STANDARD ISO 13878:1998 SOIL QUALITY
537 MS ISO 6107-3:2004 (CONFIRMED 2014) WATER QUALITY - VOCABULARY - PART 3 (ISO 6107-3:1993 AND ITS AMENDMENT 1:2001,IDT) 01.040.13; 13.060.01 IDENTICAL TO INTERNATIONAL STANDARD ISO 6107-3:1993 AND ITS AMENDMENT 1:2001 WATER QUALITY
538 MS ISO 6107-4:2004 (CONFIRMED 2014) WATER QUALITY - VOCABULARY - PART 4 (ISO 6107-4:1993, IDT) 01.040.13; 13.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 6107-4:1993 WATER QUALITY
539 MS ISO 6107-8:2004 (CONFIRMED 2014) WATER QUALITY - VOCABULARY - PART 8 (ISO 6107-8:1993 AND ITS AMENDMENT 1:2001,IDT) 01.040.13; 13.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 6107-8:1993 AND ITS AMENDMENT 1:2001 WATER QUALITY
540 MS ISO 6107-9:2004 (CONFIRMED 2014) WATER QUALITY - VOCABULARY - PART 9:ALPHABETICAL LIST AND SUBJECT INDEX NOTE: TOTAL ADOPTION OF ISO 6107-9:1997 01.040.13; 13.060.01 IDENTICAL TO INTERNATIONAL STANDARD  ISO 6107-9:1997 WATER QUALITY
541 MS ISO 1552:2003 (CONFIRMED 2014) LIQUID CHLORINE FOR INDUSTRIAL USE - METHOD OF SAMPLING (FOR DETERMINING ONLY THE VOLUMETRIC CHLORINE CONTENT) (ISO 1552:1976, IDT) 71.100.35 IDENTICAL TO INTERNATIONAL STANDARD ISO 1552:1976 WATER TREATMENT CHEMICALS
542 MS ISO 2120:2003 (CONFIRMED 2014) LIQUID CHLORINE FOR INDUSTRIAL USE - DETERMINATION OF THE CONTENT OF CHLORINE BY VOLUME IN THE VAPORIZED PRODUCT (ISO 2120:1972, IDT) 71.100.35 IDENTICAL TO INTERNATIONAL STANDARD ISO 2120:1972 WATER TREATMENT CHEMICALS
543 MS ISO 2121:2003 (CONFIRMED 2014) LIQUID CHLORINE FOR INDUSTRIAL USE - DETERMINATION OF WATER CONTENT - GRAVIMETRIC METHOD (ISO 2121:1972, IDT) 71.100.35 IDENTICAL TO INTERNATIONAL STANDARD ISO 2121:1972 WATER TREATMENT CHEMICALS
544 MS ISO 2831:2003 (CONFIRMED 2014) SODIUM FLUORIDE FOR INDUSTRIAL USE - DETERMINATION OF WATER-INSOLUBLE MATTER (ISO 2831:1973, IDT) 71.100.35 IDENTICAL TO INTERNATIONAL STANDARD ISO 2831:1973 WATER TREATMENT CHEMICALS
545 MS ISO 2832:2003 (CONFIRMED 2014) SODIUM FLUORIDE FOR INDUSTRIAL USE - DETERMINATION OF MOISTURE CONTENT (ISO 2832:1973, IDT) 71.100.35 IDENTICAL TO INTERNATIONAL STANDARD ISO 2832:1973 WATER TREATMENT CHEMICALS
546 MS ISO 2833:2003 (CONFIRMED 2014) SODIUM FLUORIDE FOR INDUSTRIAL USE - DETERMINATION OF FLUORINE CONTENT - MODIFIED WILLARD - WINTER METHOD (ISO 2833:1973, IDT) 71.100.35 IDENTICAL TO INTERNATIONAL STANDARD ISO 2833:1973 WATER TREATMENT CHEMICALS
547 MS ISO 4281:2005 (CONFIRMED 2014) SODIUM HEXAFLUOROSILICATE FOR INDUSTRIAL USE - DETERMINATION OF FREE ACIDITY AND TOTAL HEXAFLUOROSILICATE CONTENT - TITRIMETRIC METHOD (ISO 4281:1977, IDT) 71.040.40 IDENTICAL TO INTERNATIONAL STANDARD ISO 4281:1977 WATER TREATMENT CHEMICALS
548 MS ISO 5444:2005 (CONFIRMED 2014) SODIUM FLUOROSILICATE FOR INDUSTRIAL USE - DETERMINATION OF LOSS IN MASS AT 105oC (ISO 5444:1978, IDT) 71.040.40 IDENTICAL TO INTERNATIONAL STANDARD ISO 5444:1978 WATER TREATMENT CHEMICALS
549 MS ISO 5993:2003 (CONFIRMED 2014) SODIUM HYDROXIDE FOR INDUSTRIAL USE - DETERMINATION OF MERCURY CONTENT - FLAMELESS ATOMIC ABSORPTION SPECTROMETRIC METHOD (ISO 5993:1979, IDT) 71.100.35 IDENTICAL TO INTERNATIONAL STANDARD ISO 5993:1979 WATER TREATMENT CHEMICALS
550 MS ISO 740:2003 (CONFIRMED 2014) SODIUM CARBONATE FOR INDUSTRIAL USE - DETERMINATION OF TOTAL SOLUBLE ALKALINITY - TITRIMETRIC METHOD (ISO 740:1976, IDT) 71.100.35 IDENTICAL TO INTERNATIONAL STANDARD ISO 740:1976 WATER TREATMENT CHEMICALS
551 MS 2555:2014 LIQUID FERTILIZERS - SPECIFICATION 65.080 INDIGENOUS - FERTILIZERS
552 MS 54:2001 (CONFIRMED 2014) SPEC. FOR MAGNESIUM SULPHATE, FERTILIZER GRADE (SECOND REVISION) 65.080 INDIGENOUS - FERTILIZERS
553 MS 1575:2003 (CONFIRMED 2014) TEST METHODS FOR WATER IN ENGINE COOLANT CONCENTRATE BY KARL FISCHER REAGENT METHOD 71.080 INDIGENOUS ASTM D1123-99 GENERAL PURPOSE CHEMICALS
554 MS 165:2014 INDUSTRIAL ACIDS - SAMPLING AND TEST METHODS (FIRST REVISION) 71.060.30 INDIGENOUS - GENERAL PURPOSE CHEMICALS
555 MS 1710:2003 (CONFIRMED 2014) TEST METHOD FOR TRACE CHLORIDE ION IN ENGINE COOLANTS 71.080 INDIGENOUS - GENERAL PURPOSE CHEMICALS
556 MS 174:2014 FORMIC ACID - TECHNICAL GRADE - SPECIFICATION (FIRST REVISION) 71.080.40 INDIGENOUS - GENERAL PURPOSE CHEMICALS
557 MS 177:2014 HYDROCHLORIC ACID - TECHNICAL GRADE - SPECIFICATION (FIRST REVISION) 71.060.30 INDIGENOUS - GENERAL PURPOSE CHEMICALS
558 MS 1923:2006 (CONFIRMED 2014) TEST METHOD FOR FOAMING TENDENCIES OF ENGINE COOLANTS IN GLASSWARE 71.080 ADAPTED FROM INTERNATIONAL STANDARD ASTM D 1881-97 GENERAL PURPOSE CHEMICALS
559 MS 1924:2006 (CONFIRMED 2014) TEST METHOD FOR EFFECT OF COOLING SYSTEM CHEMICAL SOLUTIONS ON ORGANIC FINISHES FOR AUTOMOTIVE VEHICLES 71.080 ADAPTED FROM INTERNATIONAL STANDARD ASTM D 1287-91 GENERAL PURPOSE CHEMICALS
560 MS 2559:2014 LIMESTONE, QUICKLIME, HYDRATED LIME AND PUTTY LIME - METHODS FOR PHYSICAL TESTING 91.100.10 INDIGENOUS - LIME & LIME PRODUCTS
561 MS 1159:2009 (CONFIRMED 2014) PENCIL - SPECIFICATION (FIRST REVISION) 35.260 INDIGENOUS - SAFETY OF TOYS
562 MS 1080:1987 (CONFIRMED 2014) METHOD OF TEST FOR DETERMINATION OF TOTAL NON-IONIC DETERGENT BY BATCH TECHNIQUE 71.100.40 INDIGENOUS - SOAPS AND DETERGENTS
563 MS 1285:2014 GLASS CLEANER - SPECIFICATION (SECOND REVISION) 71.100.40 INDIGENOUS - SOAPS AND DETERGENTS
564 MS 1526:2014 FLOOR LIQUID DETERGENTS - SPECIFICATION (FIRST REVISION) 71.100.40 INDIGENOUS - SOAPS AND DETERGENTS
565 MS 553:2002 (CONFIRMED 2014) SPECIFICATION FOR DETERGENT POWDER FOR HAND WASH HOUSEHOLD LAUNDRY (FIRST REVISION) 71.100.40 INDIGENOUS - SOAPS AND DETERGENTS
566 MS 791:2014 LIQUID DETERGENT FOR HOUSEHOLD HAND DISH WASHING - SPECIFICATION (SECOND REVISION) 71.100.40 INDIGENOUS - SOAPS AND DETERGENTS
567 MS ISO 8391-1:2005 (CONFIRMED 2015) CERAMIC COOKWARE IN CONTACT WITH FOOD - RELEASE OF LEAD AND CADMIUM - PART 1: METHOD OF TEST (ISO 8391-1:1986, IDT) 67.250, 81.040.30, 81.060.20, 97.040.60 IDENTICAL TO INTERNATIONAL STANDARD ISO 8391-1:1986 CLAY & CLAY PRODUCTS
568 MS ISO 8391-2:2005 (CONFIRMED 2015) CERAMIC COOKWARE IN CONTACT WITH FOOD - RELEASE OF LEAD AND CADMIUM - PART 2: PERMISSIBLE LIMITS (ISO 8391-2:1986, IDT) 67.250, 81.040.30, 81.060.20, 97.040.60 IDENTICAL TO INTERNATIONAL STANDARD ISO 8391-2:1986 CLAY & CLAY PRODUCTS
569 MS 1993:2007 (CONFIRMED 2015) WATER QUALITY - DETERMINATION OF IRON - SPECTROMETRIC METHOD USING 1,10-PHENANTHROLINE (ISO 6332:1988, MOD) 13.060.50 MODIFIED TO INTERNATIONAL STANDARD ISO 6332:1988 PHYSICAL, CHEMICAL, BIOCHEMICAL TEST METHODS (WATER QUALITY)
570 MS 2263:2009 (CONFIRMED 2015) WATER QUALITY- DETERMINATION OF AMMONIACAL NITROGEN -DISTILLATION AND TITRATION METHOD (ISO 5664:1984, MOD) 13.060.50 MODIFIED TO INTERNATIONAL STANDARD ISO 5664:1984 PHYSICAL, CHEMICAL, BIOCHEMICAL TEST METHODS (WATER QUALITY)
571 MS ISO 7888:2005 (CONFIRMED 2015) WATER QUALITY - DETERMINATION OF ELECTRICAL CONDUCTIVITY (ISO 7888:1985, IDT) 13.060.45 IDENTICAL TO INTERNATIONAL STANDARD ISO 7888:1985 PHYSICAL, CHEMICAL, BIOCHEMICAL TEST METHODS (WATER QUALITY)
572 MS 1850: PART 9:2006 (CONFIRMED 2015) WATER QUALITY - SAMPLING - PART 9: GUIDANCE ON SAMPLING FROM MARINE WATERS (ISO 5667 - PART 9:1992, IDT) 13.060.45 IDENTICAL TO INTERNATIONAL STANDARD ISO 5667 - PART 9:1992 SAMPLINGS (WATER QUALITY)
573 MS ISO 5667: PART 16:2007
(CONFIRMED 2015)
WATER QUALITY - SAMPLING - PART 16: GUIDANCE ON BIOTESTING OF SAMPLES (ISO 5667-16:1998, IDT) 13.060.45 IDENTICAL TO INTERNATIONAL STANDARD ISO 5667-16:1998 SAMPLINGS (WATER QUALITY)
574 MS ISO 4318:2007 (CONFIRMED 2015) SURFACE ACTIVE AGENTS AND SOAPS - DETERMINATION OF WATER CONTENT - AZEOTROPIC DISTILLATION METHOD (ISO 4318:1989, IDT) 71.100.40 IDENTICAL TO INTERNATIONAL STANDARD ISO 4318:1989 SOAPS AND DETERGENTS
575 MS 133: PART F6:2008 (CONFIRMED 2015) PAINTS AND VARNISHES - NATURAL WEATHERING OF COATINGS - PART F6: EXPOSURE AND ASSESSMENT (FIRST REVISION) (ISO 2810:2004, IDT) 87.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 2810:2004 PAINTS AND VARNISHES
576 MS ISO 11093-1:2007 (CONFIRMED 2015) PAPER AND BOARD - TESTING OF CORES - PART 1: SAMPLING (ISO 11093-1:1994, IDT) 85.080 IDENTICAL TO INTERNATIONAL STANDARD ISO 11093-1:1994 PULP, PAPER AND BOARD
577 MS ISO 11093-2:2007 (CONFIRMED 2015) PAPER AND BOARD - TESTING OF CORES - PART 2: CONDITIONING OF TEST SAMPLES (ISO 11093-2:1994, IDT) 85.080 IDENTICAL TO INTERNATIONAL STANDARD ISO 11093-2:1994 PULP, PAPER AND BOARD
578 MS ISO 11093-3:2008 (CONFIRMED 2015) PAPER AND BOARD - TESTING OF CORES - PART 3: DETERMINATION OF MOISTURE CONTENT USING THE OVEN DRYING METHOD (ISO 11093-3:1994, IDT) 85.080.00 IDENTICAL TO INTERNATIONAL STANDARD ISO 11093-3:1994 PULP, PAPER AND BOARD
579 MS ISO 11093-6:2008 (CONFIRMED 2015) PAPER AND BOARD - TESTING OF CORES - PART 6: DETERMINATION OF BENDING STRENGTH BY THE THREE-POINT METHOD (ISO 11093-6:2005, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 11093-6:2005 PULP, PAPER AND BOARD
580 MS ISO 11093-9:2007 (CONFIRMED 2015) PAPER AND BOARD - TESTING OF CORES - PART 9: DETERMINATION OF FLAT CRUSH RESISTANCE (ISO 11093-9:2006, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 11093-9:2006 PULP, PAPER AND BOARD
581 MS ISO 13542:2007 (CONFIRMED 2015) PAPER AND BOARD - SPECIFICATION FOR INTERNAL DIAMETERS OF CORES FOR REELS (ISO 13542:2006, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 13542:2006 PULP, PAPER AND BOARD
582 MS ISO 17812:2008 (CONFIRMED 2015) PAPER, BOARD AND PULPS - DETERMINATION OF TOTAL MAGNESIUM, TOTAL CALCIUM, TOTAL MANGANESE, TOTAL IRON AND TOTAL COPPER (ISO 17812:2007, IDT) 85.040, 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 17812:2007 PULP, PAPER AND BOARD
583 MS ISO 1924-3:2008 (CONFIRMED 2015) PAPER AND BOARD - DETERMINATION OF TENSILE PROPERTIES - PART 3: CONSTANT RATE OF ELONGATION METHOD (100 mm/min) (ISO 1924-3:2005, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 1924-3:2005 PULP, PAPER AND BOARD
584 MS ISO 216:2008 (CONFIRMED 2015) WRITING PAPER AND CERTAIN CLASSES OF PRINTED MATTER - TRIMMED SIZES - A AND B SERIES, AND INDICATION OF MACHINE DIRECTION (ISO 216:2007, IDT) 85.080.10 IDENTICAL TO INTERNATIONAL STANDARD ISO 216:2007 PULP, PAPER AND BOARD
585 MS ISO 22754:2009 (CONFIRMED 2015) PULP AND PAPER - DETERMINATION OF THE EFFECTIVE RESIDUAL INK CONCENTRATION (ERIC NUMBER) BY INFRARED REFLECTANCE MEASUREMENT (ISO 22754:2008, IDT) 85.060, 85.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 22754:2008 PULP, PAPER AND BOARD
586 MS ISO 2470-2:2009 (CONFIRMED 2015) PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE BLUE REFLECTANCE FACTOR - PART 2: OUTDOOR DAYLIGHT CONDITIONS (D65 BRIGHTNESS) (ISO 2470-2:2008, IDT) 85.060, 85.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 2470-2:2008 PULP, PAPER AND BOARD
587 MS ISO 3036:2009 (CONFIRMED 2015) BOARD - DETERMINATION OF PUNCTURE RESISTANCE (ISO 3036:1975, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 3036:1975 PULP, PAPER AND BOARD
588 MS ISO 4119:2007 (CONFIRMED 2015) PULPS - DETERMINATION OF STOCK CONCENTRATION (ISO 4119:1995, IDT) 85.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 4119:1995 PULP, PAPER AND BOARD
589 MS ISO 5267-1:2008, AMD.1:2010
(CONFIRMED 2015)
PULPS - DETERMINATION OF DRAINABILITY - PART 1: SCHOPPER-RIEGLER METHOD (ISO 5267-1:1999, IDT) 85.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 5267-1:1999 PULP, PAPER AND BOARD
590 MS ISO 5267-2:2007 (CONFIRMED 2015) PULPS - DETERMINATION OF DRAINABILITY - PART 2: "CANADIAN STANDARD" FREENESS METHOD (ISO 5267-2:2001, IDT) 85.050 IDENTICAL TO INTERNATIONAL STANDARD ISO 5267-2:2001 PULP, PAPER AND BOARD
591 MS ISO 5269-1:2007 (CONFIRMED 2015) PULPS - PREPARATION OF LABORATORY SHEETS FOR PHYSICAL TESTING - PART 1: CONVENTIONAL SHEET-FORMER METHOD (ISO 5269-1:2005, IDT) 85.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 5269-1:2005 PULP, PAPER AND BOARD
592 MS ISO 638:2009 (CONFIRMED 2015) PAPER, BOARD AND PULPS - DETERMINATION OF DRY MATTER CONTENT - OVEN-DRYING METHOD (FIRST REVISION) (ISO 638:2008, IDT) 85.060, 85.040 IDENTICAL TO INTERNATIONAL STANDARD ISO 638:2008 PULP, PAPER AND BOARD
593 MS ISO 8254-1:2009 (CONFIRMED 2015) PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 1: 75 DEGREE GLOSS WITH A CONVERGING BEAM, TAPPI METHOD (ISO 8254-1:2009, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 8254-1:2009 PULP, PAPER AND BOARD
594 MS ISO 8791-3:2007 (CONFIRMED 2015) PAPER AND BOARD - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAK METHODS) - PART 3: SHEFFIELD METHOD (ISO 8791-3:2005, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 8791-3:2005 PULP, PAPER AND BOARD
595 MS ISO 8791-4:2008 (CONFIRMED 2015) PAPER AND BOARD - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAK METHODS) - PART 4: PRINT-SURF METHOD (ISO 8791-4:2007, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 8791-4:2007 PULP, PAPER AND BOARD
596 MS ISO 9197:2007 (CONFIRMED 2015) PAPER, BOARD AND PULPS - DETERMINATION OF WATER-SOLUBLE CHLORIDES (ISO 9197:2006, IDT) 85.060 IDENTICAL TO INTERNATIONAL STANDARD ISO 9197:2006 PULP, PAPER AND BOARD
597 MS 1983:2007 (CONFIRMED 2015) TEST METHOD FOR SHEAR STRENGTH OF CONTINUOUS FIBER-REINFORCED ADVANCED CERAMICS AT AMBIENT TEMPERATURES 81.060.30 ADAPTED FROM INTERNATIONAL STANDARD ASTM C 1292-00 FINE CERAMICS
598 MS 1984:2007 (CONFIRMED 2015) LABORATORY COLONISATION OF INSECTS OF PUBLIC HEALTH IMPORTANCE - GUIDELINES 65.100.10, 71.100.99 INDIGENOUS - HOUSEHOLD PESTICIDES
599 MS 1519:2001 (CONFIRMED 2015) METHODS OF TEST FOR HORMONE WEEDKILLERS OF THE PHENOXYACETIC ACID (2,4-D) 65.100 INDIGENOUS - PESTICIDES AND AGROCHEMICALS
600 MS 1717: PART 1:2003 (CONFIRMED 2015) SPECIFICATION FOR DIURON PT. 1: DIURON TECHNICAL 65.100 INDIGENOUS - PESTICIDES AND AGROCHEMICALS
601 MS 1717: PART 2:2003 (CONFIRMED 2015) SPECIFICATION FOR DIURON : PT. 2: DIURON WETTABLE POWDER 65.100 INDIGENOUS - PESTICIDES AND AGROCHEMICALS
602 MS 1717: PART 3:2003 (CONFIRMED 2015) SPEC. FOR DIURON PT. 3: DIURON WATER - DISPERSIBLE GRANULES 65.100 INDIGENOUS - PESTICIDES AND AGROCHEMICALS
603 MS 1717: PART 4:2003 (CONFIRMED 2015) SPECIFICATION FOR DIURON: PART 4: SUSPENSION CONCENTRATE 65.100 INDIGENOUS - PESTICIDES AND AGROCHEMICALS
604 MS 1887:2005 (CONFIRMED 2015) TEST METHOD FOR PARTICLE SIZE OF SOAPS AND OTHER DETERGENTS 71.100.40 ADAPTED FROM INTERNATIONAL STANDARD ASTM D502-89 SOAPS AND DETERGENTS
605 MS 185:2010 (CONFIRMED 2015) AGRICULTURAL PESTICIDES - SAMPLING METHODS (FIRST REVISION) 65.100 INDIGENOUS - PESTICIDES AND AGROCHEMICALS
606 MS ISO 5814:2016 WATER QUALITY - DETERMINATION OF DISSOLVED OXYGEN - ELECTROCHEMICAL PROBE METHOD (ISO 5814:2012, IDT) 13.060.50 IDENTICAL TO INTERNATIONAL STANDARD ISO 5814:2012 PHYSICAL, CHEMICAL, BIOCHEMICAL TEST METHODS (WATER QUALITY)
607 MS ISO 8124-1:2016 SAFETY OF TOYS - PART 1: SAFETY ASPECTS RELATED TO MECHANICAL AND PHYSICAL PROPERTIES (SECOND REVISION) (ISO 8124-1:2014, IDT) 97.200.50 IDENTICAL TO INTERNATIONAL STANDARD ISO 8124-1:2014 SAFETY OF TOYS
608 MS ISO 8124-2:2016 SAFETY OF TOYS - PART 2: FLAMMABILITY (SECOND REVISION)(ISO 8124-2:2014,IDT) 97.200.50 IDENTICAL TO INTERNATIONAL STANDARD ISO 8124-2:2014 SAFETY OF TOYS
609 MS ISO/IEC GUIDE 50:2016 SAFETY ASPECTS - GUIDELINES FOR CHILD SAFETY IN STANDARDS AND OTHER SPECIFICATIONS (ISO/IEC GUIDE 50:2014, IDT) 01.120, 97.190 IDENTICAL TO INTERNATIONAL STANDARD ISO/IEC GUIDE 50:2014 SAFETY OF TOYS
610 MS ISO 5667-1:2016 WATER QUALITY - SAMPLING - PART 1: GUIDANCE ON THE DESIGN OF SAMPLING PROGRAMMES AND SAMPLING TECHNIQUES (ISO 5667-1:2006, IDT) 13.060.45 IDENTICAL TO INTERNATIONAL STANDARD ISO 5667-1:2006 SAMPLINGS (WATER QUALITY)
611  MS ISO 5667-3:2016 WATER QUALITY - SAMPLING - PART 3: GUIDANCE ON THE PRESERVATION AND HANDLING OF WATER SAMPLES (ISO 5667 - PART 3:2012, IDT) 13.060.45 IDENTICAL TO INTERNATIONAL STANDARD ISO 5667 - PART 3:2012 SAMPLINGS (WATER QUALITY)
612 MS ISO 5667-20: 2016 WATER QUALITY - SAMPLING - PART 20: GUIDANCE ON THE USE OF DATA FOR DECISION MAKING - COMPLIANCE WITH TRESHOLDS AND CLASSIFICATION SYSTEMS (ISO 5667-20: 2008, IDT) 13.060.45 IDENTICAL TO INTERNATIONAL STANDARD ISO 5667-20: 2008 SAMPLINGS (WATER QUALITY)
613 MS ISO 10694:2016 SOIL QUALITY - DETERMINATION OF ORGANIC AND TOTAL CARBON AFTER DRY COMBUSTION (ELEMENTARY ANALYSIS) (ISO 10694:1995, MOD) 13.080 MODIFIED TO INTERNATIONAL STANDARD ISO 10694:1995 SOIL QUALITY
614 MS ISO 9698:2016 WATER QUALITY - DETERMINATION OF TRITIUM ACTIVITY CONCENTRATION - LIQUID SCINTILLATION COUNTING METHOD (ISO 9698:2010, IDT) 31.060.60; 13.280 IDENTICAL TO INTERNATIONAL STANDARD ISO 9698:2010 WATER QUALITY
615 MS 46:2016 SPECIFICATION FOR GROUND PHOSPHATE ROCK, AGRICULTURAL GRADE (THIRD REVISION) 65.080 INDIGENOUS - FERTILIZERS
616 MS 2624:2016 SAFETY DATA SHEET - CONTENT AND ORDER OF SECTIONS 71.100.01 INDIGENOUS - GENERAL PURPOSE CHEMICALS
617 MS 1996:2016
TERMINOLOGY RELATING TO LIME AND LIME PRODUCTS  (AS USED BY THE INDUSTRY) (FIRST REVISION)
91.100.10 INDIGENOUS - LIME & LIME PRODUCTS
618 MS 1869:2017 WATER QUALITY - ENUMERATION OF CULTURABLE MICRO-ORGANISM - COLONY COUNT BY INOCULATION IN A NUTRIENT AGAR CULTURE MEDIUM (ISO 6222:1999, MOD) (FIRST REVISION) 07.100.20 MODIFIED TO INTERNATIONAL STANDARD ISO 6222:1999 MICROBIOLOGICAL & BIOLOGICAL METHODS (WATER QUALITY)
619 MS ISO 5667-19:2017 WATER QUALITY - SAMPLING - PART 19: GUIDANCE ON SAMPLING OF MARINE SEDIMENTS (ISO 5667-19:2004, IDT) 13.060.10, 13.060.45 IDENTICAL TO INTERNATIONAL STANDARD ISO 5667-19:2004 SAMPLINGS (WATER QUALITY)
620 MS ISO 5667-8:2017 WATER QUALITY - SAMPLING - PART 8: GUIDANCE ON THE SAMPLING OF WET DEPOSITION (ISO 5667-8:1993) 13.060.45 MODIFIED TO INTERNATIONAL STANDARD ISO 5667-8:1993 SAMPLINGS (WATER QUALITY)
621 MS ISO 5667-21:2017 WATER QUALITY - SAMPLING - PART 21: GUIDANCE ON SAMPLING OF DRINKING WATER DISTRIBUTED BY TANKERS OR MEANS OTHER THAN DISTRIBUTION PIPES (ISO 5667-21:2010) 13.060.20, 13.060.45 MODIFIED TO INTERNATIONAL STANDARD ISO 5667-21:2010 SAMPLINGS (WATER QUALITY)
622 MS ISO 2871-1:2017 SURFACE ACTIVE AGENTS - DETERGENTS - DETERMINATION OF CATIONIC-ACTIVE MATTER CONTENT - PART 1: HIGH-MOLECULAR-MASS CATIONIC-ACTIVE MATTER (ISO 2871-1:2010, IDT) (FIRST REVISION) 71.100.40 IDENTICAL TO INTERNATIONAL STANDARD ISO 2871-1:2010 SOAPS AND DETERGENTS
623 MS ISO 2871-2:2017 SURFACE ACTIVE AGENTS - DETERGENTS - DETERMINATION OF CATIONIC-ACTIVE MATTER CONTENT - PART 2: CATIONIC-ACTIVE MATTER OF LOW MOLECULAR MASS (BETWEEN 200 AND 500) (ISO 2871-2:2010, IDT) (FIRST REVISION) 71.100.40 IDENTICAL TO INTERNATIONAL STANDARD ISO 2871-2:2010 SOAPS AND DETERGENTS
624 MS ISO 4317:2017 SURFACE ACTIVE AGENTS AND DETERGENTS - DETERMINATION OF WATER CONTENT - KARL FISCHER METHOD (ISO 4317:2011, IDT) (FIRST REVISION) 71.100.40 IDENTICAL TO INTERNATIONAL STANDARD ISO 4317:2011 SOAPS AND DETERGENTS
625 MS ISO 9697:2017 WATER QUALITY - GROSS BETA ACTIVITY IN NON-SALINE WATER - TEST METHOD USING THICK SOURCE (FIRST REVISION) (ISO 9697:2015, IDT) 07.100.20 IDENTICAL TO INTERNATIONAL STANDARD ISO 9697:2015 WATER QUALITY
626 MS ISO 15923-1:2017 WATER QUALITY - DETERMINATION OF SELECTED PARAMETER BY DISCRETE ANALYSIS SYSTEMS - PART 1: AMMONIUM,  NITRATE, NITRITE, CHLORIDE, ORTHOPHOSPHATE, SULFATE AND SILICATE WITH PHOTOMETRIC DETECTION (ISO 15923-1:2013, MOD) 13.060.50 MODIFIED TO INTERNATIONAL STANDARD ISO 15923-1:2013 PHYSICAL, CHEMICAL, BIOCHEMICAL TEST METHODS (WATER QUALITY)
627 MS 417-1:2017 THE ANALYSIS OF FERTILIZERS : PART 1 : METHOD OF SAMPLING AND SAMPLE PREPARATION (SECOND REVISION) 65.080 INDIGENOUS - FERTILIZERS
628 MS 23: 2017 HOUSEHOLD INSECTICIDE PRODUCTS - MOSQUITO COIL - CHEMICAL, PHYSICAL AND BIOLOGICAL EFFICACY REQUIREMENTS
(FIFTH REVISION)
65.100.01 INDIGENOUS - HOUSEHOLD PESTICIDES
629 MS 2627:2017 DETECTION OF PORCINE DNA - TEST METHOD - FOOD AND FOOD PRODUCTS 07.080 67.050 INDIGENOUS - PORCINE DNA
630 MS 849:2017
LIME AND LIME PRODUCTS - SAMPLING, SAMPLE PREPARATION, PACKAGING AND MARKING (SECOND REVISION)
91.100.10 INDIGENOUS - LIME & LIME PRODUCTS
631 MS 2631:2017 MALATHION - SPECIFICATION AND TEST METHODS 65.100.10 INDIGENOUS - PESTICIDES AND AGROCHEMICALS
632 MS 701:2017 CLAY AND CLAY PRODUCTS - COMMERCIAL SAND - SPECIFICATIONS (FIRST REVISION) 81.040.10  81.060.10 INDIGENOUS - CLAY & CLAY PRODUCTS
633 MS 2632:2017 LIME AND LIME PRODUCTS – ADDITIVES FOR PLASTERING MORTAR – SPECIFICATIONS 91.100.10 INDIGENOUS - LIME & LIME PRODUCTS
634 MS 2628:2017 PAINT AND COATING SYSTEM FOR NAVAL VESSELS 25.220.10     87.020     87.040 INDIGENOUS - PAINTS AND VARNISHES
635 MS ISO 9308-1:2018 WATER QUALITY - ENUMERATION OF ESCHERICHIA COLI AND COLIFORM BACTERIA - PART 1: MEMBRANE FILTRATION METHOD FOR WATERS WITH LOW BACTERIAL BACKGROUND FLORA (ISO 9308-1:2014, MOD) (FIRST REVISION)  07.100.20 MODIFIED TO INTERNATIONAL STANDARD ISO 9308-1:2014 MICROBIOLOGICAL & BIOLOGICAL METHODS (WATER QUALITY)
636 MS 2633:2018 HOUSEHOLD LAUNDRY DETERGENT POWDER - SPECIFICATION 71.100.40 INDIGENOUS - SOAPS AND DETERGENTS
637 MS ISO 5667-12:2018 WATER QUALITY – SAMPLING – PART 12: GUIDANCE ON SAMPLING OF BOTTOM SEDIMENTS (ISO 5667-12:2017,IDT) 13.060.40 IDENTICAL TO INTERNATIONAL STANDARD ISO 5667-12:2017 SAMPLINGS (WATER QUALITY)
638 MS ISO/TR 8124-8:2018 SAFETY OF TOYS - PART 8: AGE DETERMINATION GUIDELINES (ISO/TR 8124-8:2016, IDT) 97.200.50 IDENTICAL TO INTERNATIONAL STANDARD ISO/TR 8124-8:2016 SAFETY OF TOYS
639 MS ISO 14704:2018 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FLEXURAL STRENGTH OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE (SECOND REVISION) (ISO 14704:2016, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 14704:2016 FINE CERAMICS
640 MS ISO 17561:2018  FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR ELASTIC MODULI OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE BY SONIC RESONANCE (FIRST REVISION) (ISO 17561:2016, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 17561:2016 FINE CERAMICS
641 MS ISO 17562:2018  FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR LINEAR THERMAL EXPANSION OF MONOLITHIC CERAMICS BY PUSH-ROD TECHNIQUE (FIRST REVISION) (ISO 17562:2016, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 17562:2016 FINE CERAMICS
642 MS ISO 20507:2018  FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) – VOCABULARY (FIRST REVISION) (ISO 20507:2014, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 20507:2014 FINE CERAMICS
643 MS ISO 22197-1:2018  FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) -- TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS -- PART 1: REMOVAL OF NITRIC OXIDE (FIRST REVISION) (ISO 22197-1:2016, IDT) 81.060.30 IDENTICAL TO INTERNATIONAL STANDARD ISO 22197-1:2016 FINE CERAMICS


 

back to top